Found the wheels I want, but I have a question
#1
Found the wheels I want, but I have a question
Ok so I found the wheels that I want to get but they come in 3 different options. Everything is identical except the offset.
I can get them in -13.00mm,0.00mm, and +6.00mm[
Now Im trying to understand what the heck offset means. The distance from the centerline of the wheel to where the wheel meets the hub. so does that mean with the 0.00mm offset the centerline of the wheel is lined up with where the wheel meets the hub, and with the +6.00mm, the centerline of the wheel is 6mm to the outside of the truck away from where the wheel meets the hub. I.E. the +6.00mm will give a wider stance than the 0.00mm and the -13.00 will give a narrower stance?
Is this right or am i backwards here? Hope I made sence.
Also, they have 4" backspacing. Is that bad or good?
And last but not least, what thread are our studs for the lug nuts?
I can get them in -13.00mm,0.00mm, and +6.00mm[
Now Im trying to understand what the heck offset means. The distance from the centerline of the wheel to where the wheel meets the hub. so does that mean with the 0.00mm offset the centerline of the wheel is lined up with where the wheel meets the hub, and with the +6.00mm, the centerline of the wheel is 6mm to the outside of the truck away from where the wheel meets the hub. I.E. the +6.00mm will give a wider stance than the 0.00mm and the -13.00 will give a narrower stance?
Is this right or am i backwards here? Hope I made sence.
Also, they have 4" backspacing. Is that bad or good?
And last but not least, what thread are our studs for the lug nuts?
Last edited by Ranger Wannabe; 01-04-2010 at 08:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
B-Dunk88
Wheels & Tires Semi-Tech
29
04-03-2009 09:26 AM
Fx4wannabe01
Exterior Semi-Tech
1
01-01-2008 12:28 PM
TommyC
General Ford Ranger Discussion
11
08-01-2006 03:53 PM