I got a ask i know that the manufactures say that the biggest tire size that i can fit is a 31'' tire without rubbing. I was wondering how much i can push this with a stock setup? I found a deal on a set of tires and rims for 500$ and they are 32x11.50 r 15's How much work would it take to make it work? and Can I get away without torsion bar cranking? Input is Appreciated.

My rig is a 2002 xlt 4x4

 

 

i ran 33x12.5x15 with minor trimming and i mean very minor cutting of the front valance

 

You'll be fine with the 32's.

 

Ya they will fit fine, just check the maximum tire size size thread.

 

Sweet thanks . you guys think its worth the price for 4 tires and rims? They look ok but i did not check out the tread

 

if the tread is around 75%+ id say go for it personally

 

agreed

 

Yeah they will fit easily. You could even fit 33x10.50 with very very minor rubbing. Usually only happens at full crank going over a speed bump or four wheeling.

 

not the best pic but here is 32x11.50x15 with t-bar crank and rear lift shackles

 

get em, i got 31s for my truck and i've been kicking myself for it ever since, should went with a least a 32, would have looked so much better