pro comp 7069 flat blacks
#1
#3
#6
alright so im kinda (completely) new to the tire wheel deal. I love the pro comp 7069 look (the bullet hole style) but i was told that the offset on the 15x10s with 33 12.50s would stick out WAY to far. I want my tires to stick out of the wheelwell some, but how far would they stick out? I'd love some black rims. needing help here. Thanks
#10
Hopefully I will be ordering a set of those this week !! Along with the BL, then I just gotta wait for the 33" KM2's to come off back order so I can get some tires. Or find a good deal on the Toyo's. If you get them on there soon post up some pictures. would love to see them on a truck (though I'd rather mine was 1st LOL)
#17
#18
all this back and forth blahblahblah on backspacing is easily cured by looking at the wheel manufacturer's website and the wheel you're after....take a look at the specs.
10" wide with even 4" backspace(sucked in for a 10") is not gonna work well on a non-lifted truck with 12.50 tires. I don't suggest it. Stick with 8's and 3.50-4.00" backspace. 8 w/4" backspace and 12.50's on a 98+ will put the tire about an inch outside a non-flared truck and darn near level with the flare on a flared truck.
And yes, 15x10's with a normal 15x10 backspace(3.5-4") and 33x12.50's should be just fine with a bodylift. Normal trimming of the valence is suggested but not required.
10" wide with even 4" backspace(sucked in for a 10") is not gonna work well on a non-lifted truck with 12.50 tires. I don't suggest it. Stick with 8's and 3.50-4.00" backspace. 8 w/4" backspace and 12.50's on a 98+ will put the tire about an inch outside a non-flared truck and darn near level with the flare on a flared truck.
And yes, 15x10's with a normal 15x10 backspace(3.5-4") and 33x12.50's should be just fine with a bodylift. Normal trimming of the valence is suggested but not required.
#19
#20
#22
#23
Well to make a short answer long, I think the stock wheels were supposed to be 16's. I bought the truck used and it had 15inch wheels on it but inside the door says 16's and I think all other Edges came with 16's. But I stuck with the 15's and they fit great !! And I have the sticky weights on the inside to balance it and they clear too. When I got the wheels I actually put one of just the wheels on there to make sure everything cleared. A warning if you do that with a 15x10 and no tire on it, it WILL look WAY to wide !! I was really worried after I did that, but once I had the tires mounted they look great.
#24
Thread
Thread Starter
Forum
Replies
Last Post
03whtEDGE
OLD - Suspension, Tires, & Wheels
2
07-27-2010 06:32 PM