Fitment Question..............
#1
Fitment Question..............
Ok, so im thinking of running 33x12.50 toyo m/t's when i put my 3" BL on......... the thing is i want to run an 18" rim so bad i cant stand it. The specifications for the rims are as follows:
18x9.5
Offset: -19
Backspacing: 4-1/2
Bolt Circle: 5on 4.5
What do you wheel gurus think? And here is the wheel for reference
18x9.5
Offset: -19
Backspacing: 4-1/2
Bolt Circle: 5on 4.5
What do you wheel gurus think? And here is the wheel for reference
#2
its got stock backspacing so it should be good, but im not so sure if the -19 offset matters or not....
hot wheels by the way, you should get them
edit: didnt see tire size.. id consider going with 10.5 wide if at all possible, or try to find some wheels with a 3.5 bs or close to that....
hot wheels by the way, you should get them
edit: didnt see tire size.. id consider going with 10.5 wide if at all possible, or try to find some wheels with a 3.5 bs or close to that....
#5
#6
#7
#8
Originally Posted by rileyw05
if the backspacing is the same then wouldnt that just make the rim stick out 2.5" more outside the fender? it shouldnt pull the rim any more in than with the stockers. or am i missing something.
#11
Member
iTrader: (1)
Join Date: Nov 2005
Location: indy
Posts: 1,581
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rileyw05
if the backspacing is the same then wouldnt that just make the rim stick out 2.5" more outside the fender? it shouldnt pull the rim any more in than with the stockers. or am i missing something.
the rub compared to a 33x12.5 on a stock 15x7 will be different due to sidewall shape. i cant imagine it being any worse though.
Thread
Thread Starter
Forum
Replies
Last Post