2001 ranger with 3 inch body lift
#1
2001 ranger with 3 inch body lift
As of right now i have a 3 inch body lift with 31 X 10.5 screw the gap guards i wanna fill that gap with pure rubber how big to go and what would fit? Just dont really wanna screw around with moving crap around i wanna through them on, anyone do this already? I'm hoping 33X12.5 let me know thanks i will be posting pics very soon!!
#3
#4
with a 4" superlift on a 3" body you can fit 35x12.5x15 very comfortably, some people have gone bigger but your on your own after that...
what motor gears do you have now..?
if its a 4.10 4.10L with manual you can run 35's fine with a programmer it is recommend you jump up to a 4.56 gearing.. 4.10 is great on 33's and 4.56 is great with 35's if you have an auto 4.56 from the get go after 35's would be a smart idea to get the power back...
what motor gears do you have now..?
if its a 4.10 4.10L with manual you can run 35's fine with a programmer it is recommend you jump up to a 4.56 gearing.. 4.10 is great on 33's and 4.56 is great with 35's if you have an auto 4.56 from the get go after 35's would be a smart idea to get the power back...
#5
right now i just have everything stock with the 4.0 automatic i'm new to all the technical stuff but i am willing to learn everything and anything possible. Its 4 wheel drive also. I think i'm gonna stick with the 33 x 12, i was just curious about the body lift because i wasn't sure if that would interfer with suspension components, like if i needed to adjust the tie rod ends and ect. Thanks again i appricate it very much.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: 4 Inch lift or RCD 5.5 inch for 05 4x4(OR)
WildcatRange
OLD - Suspension, Tires, & Wheels
21
07-31-2012 01:46 AM
ranger8x8
Suspension Tech
18
06-05-2011 07:14 PM
Countryboy_94
Wheels & Tires Semi-Tech
12
02-21-2011 12:08 PM