Wheel Questions
#1
Wheel Questions
I'm looking to purchase some wheels for my 03 ranger edge 2wd and I was looking at the pro comps series 98s my question is what is the center bore of the stock wheels and what is a good offset and backspacing for the wheels. I know I'm getting the 15 x 8s and putting 31 inch tire on them any ideas or suggestions on wheels would be great thank you
#2
Here are the wheels im running, http://www.tirerack.com/wheels/Wheel...odClar=&filter im about to get some new tires, sounds like BF Goodrich Mud-Terrain T/A KM's are really nice, but also some goodyear duratracs. Im torn between those two. Hope this helps!
#4
Those procomps will work fine as long as you get the bolt pattern of 5x4.5. And since your 2wd, I'd stay with 4.5" backspacing. But it's your choice.
But you also have an edge so you should have stock fender flares right? So I'd go with the same wheels, 5x4.5 bolt pattern, and 3.75 backspacing. That will make the tires stick out just a bit outside of your flares.
Hope that helps!
But you also have an edge so you should have stock fender flares right? So I'd go with the same wheels, 5x4.5 bolt pattern, and 3.75 backspacing. That will make the tires stick out just a bit outside of your flares.
Hope that helps!
Thread
Thread Starter
Forum
Replies
Last Post
GI_JO_NATHAN
OLD - Suspension, Tires, & Wheels
9
05-03-2010 08:28 AM
dixie_boysles
Wheels & Tires Semi-Tech
12
02-23-2010 07:07 PM