Pa 3" Body lift on 2005 Ranger
#1
#2
#3
http://camburg.com/fordsprodEDGE.html
This is it the 6.0 is the one I was told to get...havent got it yet savin up the money...it is more expensive then Fab but is better for heavier off roading...
This is it the 6.0 is the one I was told to get...havent got it yet savin up the money...it is more expensive then Fab but is better for heavier off roading...
#4
#5
#9
Originally Posted by bmb005
http://camburg.com/fordsprodEDGE.html
This is it the 6.0 is the one I was told to get...havent got it yet savin up the money...it is more expensive then Fab but is better for heavier off roading...
This is it the 6.0 is the one I was told to get...havent got it yet savin up the money...it is more expensive then Fab but is better for heavier off roading...
That kit isn't exactly made for the trail buggy or hard offroad mudder. Camburg is a SCORE racing team. Therefor their products are mainly for the Desert enthusiast. I'm not telling you not to get their product. I'm sure it would perform really due to their expertise in offroading.
If you are looking for some more ground clearance so you can run 33"s and have some fun on the trails with your buddies, if you are 2wd I would recommend a Spindle lift from Pro comp or Doestch. They make some really nice products and stand by their name. With an add a leaf in the rear you would be able to do wonders. Now if you are 4wd, your options are limited. There is an RCD lift out that will give you roughly 5.5"s of clearance.
The good thing about this kit is that it removes your stock torsion bars and sticks you with a 2wd similar Front Coil-over suspension set up. This kit will run you around 2,299$ For the kit.
There is also a 4" superlift, that is bolt on. The RCD lift mentioned above will require minor welding but should be done by a professional none-the-less.
The Superlift suspension lift on the other hand is bolt on. It will allow you to run a 33" tire with ease as will the RCD suspension system.
This kit will roughly run you around 1,500$ for the kit.
Now if you are 2wd your options are literally unlimited...
Hope this helps.
Best of luck
gnar gnar
#10
Originally Posted by OneThreeEight
I went to summit.com to check out the PA 3" body lift and on applications it says that 2000 is the newest year that this lift works with. Does that lift work on the 05 ranger or does summit just not carry the appropriate lift?
#11
#13
Originally Posted by 04lvl2
Yes Zach is right, the kit I installed on my truck was a part number 70033. The filler neck is slightly smaller on the 04+ as Zach mentioned. We got it on there but it was not fun, I have contacted PA and they are aware of it and trying to work something out.
the correct kit as you mention is the 70033 made for 01-05 rangers. I just wanted to make sure that he doesn't buy the one he is talking about if indeed it is the 833 kit.
also I recently got together with a member of STR-OFFROAD and did a comparison of the 2 body lifts to figure out why there is such a price difference. so if anyone is interested you can see a brief writeup of it at. body lift comparison
#15
Originally Posted by OneThreeEight
I went to summit.com to check out the PA 3" body lift and on applications it says that 2000 is the newest year that this lift works with. Does that lift work on the 05 ranger or does summit just not carry the appropriate lift?
#16
Originally Posted by Ranger1
It will work just fine, it worked just fine on my 2003. I have installed 2 of them now one on my 2003 and one on Winks's 2004 both of them we did not use the filler thing on the gas line, the hose is long enough stock. Both of them were flareside beds I don't know if it makes a difference.
#17
#18
Yes the one I got from summit is made by Performance Accessory, it had everything I needed front and rear bumper relocation brackets, radiator lowering bracket, steering extention. The only extra things i bought was stick shift extension which is required for manual trannys, and I did it right by getting the gap guards. If you are going to run 33's you don't need the AAL but I got them to clear my 35's. i paid $330 for everything. One day if I get real bored or somebody else has a BL to install I will do a good how to. If you were closer i would come give you a hand.
#19
http://store.summitracing.com/defaul...=egnsearch.asp
summit does price matching just call them up 1-800-230-3030
Tell them you saw it advertised on on 4wheelparts.com for $150 and the gap guards for $60 if you need the shifter ext $30. They are all a little cheaper now then when I bought mine.
summit does price matching just call them up 1-800-230-3030
Tell them you saw it advertised on on 4wheelparts.com for $150 and the gap guards for $60 if you need the shifter ext $30. They are all a little cheaper now then when I bought mine.
#20
Originally Posted by Ranger1
Yes the one I got from summit is made by Performance Accessory, it had everything I needed front and rear bumper relocation brackets, radiator lowering bracket, steering extention. The only extra things i bought was stick shift extension which is required for manual trannys, and I did it right by getting the gap guards. If you are going to run 33's you don't need the AAL but I got them to clear my 35's. i paid $330 for everything. One day if I get real bored or somebody else has a BL to install I will do a good how to. If you were closer i would come give you a hand.
also we have about 2 more body lifts to put on next summer its looking. should be able to make a how too easy should have done it on evans but eh forgot...
i'd tell him to swing by here we have it down to 6 hours with bull****ting. its just stupid easy now LOL...
Last edited by Redneckstone; 11-03-2005 at 06:50 AM.
#24
Originally Posted by Redneckstone
how is buying the gap gaurds the right why there a peice of rubber we made the one's for 2 guys for under $15... and zach made his for FREE. there just plain simple.
also we have about 2 more body lifts to put on next summer its looking. should be able to make a how too easy should have done it on evans but eh forgot...
i'd tell him to swing by here we have it down to 6 hours with bull****ting. its just stupid easy now LOL...
also we have about 2 more body lifts to put on next summer its looking. should be able to make a how too easy should have done it on evans but eh forgot...
i'd tell him to swing by here we have it down to 6 hours with bull****ting. its just stupid easy now LOL...
Dude nothing against you Zach but man I feel like anything I say somebody picks it apart and questions me on it, dam make me not want to post anymore.
Thread
Thread Starter
Forum
Replies
Last Post
BlackRanger04
4.0L OHV & SOHC V6 Tech
17
12-09-2022 02:13 PM
eBay / Craigslist Find: 2005 Ranger "Chicago IL"
Bird76Mojo
eBay & Craigslist Finds
2
12-06-2010 08:18 PM
blue_oval
1" & 3" Body Lifts
29
01-24-2010 07:41 PM