Just a couple questions some of you more experienced people may know
#1
Just a couple questions some of you more experienced people may know
Has anyone ever checked out this cam?
http://www.fordracingparts.com/parts...rtKeyField=864
Has anyone ever had good luck with it? The M-6250-A-234 model.
and yes i kno i should trade for a 4.0 if i want performance, but i dont care i like my truck so please respect that and dont tell me what i already know lol
and also i am having a machine tech guy make a throttle body plate for my 302 throttle body that i am putting on my ranger, if anyone has experience doing this please let me know your results.
Thanks alot, Jordan
http://www.fordracingparts.com/parts...rtKeyField=864
Has anyone ever had good luck with it? The M-6250-A-234 model.
and yes i kno i should trade for a 4.0 if i want performance, but i dont care i like my truck so please respect that and dont tell me what i already know lol
and also i am having a machine tech guy make a throttle body plate for my 302 throttle body that i am putting on my ranger, if anyone has experience doing this please let me know your results.
Thanks alot, Jordan
#2
#3
well first you would need the A237 because your '94 has roller followers which jumps you to $275 from their site. It's a pretty decent cam grind which will still retain most of lower end torque.
Honestly, I wouldn't bother with the 302 throttle body, it will not change anything, the restriction is not in the intake, but actually in the head. If you really want to get some more power out of this engine pull the head off or get a second head and have a machine shop do a good porting to it. Try and find one that actually knows these heads. If you can get the head opened up and use that cam, run a 2.5 inch exhaust from the factory header back and it will open up quite a lot of power. Even the factory cam is a pretty good grind. I would suggest the main thing you should focus on is getting the head ported out and port matching the intake and exhaust manifolds.
Honestly, I wouldn't bother with the 302 throttle body, it will not change anything, the restriction is not in the intake, but actually in the head. If you really want to get some more power out of this engine pull the head off or get a second head and have a machine shop do a good porting to it. Try and find one that actually knows these heads. If you can get the head opened up and use that cam, run a 2.5 inch exhaust from the factory header back and it will open up quite a lot of power. Even the factory cam is a pretty good grind. I would suggest the main thing you should focus on is getting the head ported out and port matching the intake and exhaust manifolds.
Thread
Thread Starter
Forum
Replies
Last Post
Cap
General Ford Ranger Discussion
0
03-11-2014 09:02 PM
ThatGuy
Snapshots
12
06-11-2008 05:38 PM