3.0 Cam shaft position sensor
#1
09-27-2010
Join Date: Sep 2010
Location: willingboro
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
#2
09-27-2010
It's mounted in the top of the cam syncronizer.
Passenger side , toward the firewall , on top.
Similar to the old distributors.
If you have a higher mileage truck , go to the dealer and get a new syncro assembly. Cost ~ $200
These are a known failure part and can do major engine damage when they go bad , as they also drive the oil pump.
Use the search button at the top of the pane and enter 'cam syncro'.
Many posts about this problem.
Passenger side , toward the firewall , on top.
Similar to the old distributors.
If you have a higher mileage truck , go to the dealer and get a new syncro assembly. Cost ~ $200
These are a known failure part and can do major engine damage when they go bad , as they also drive the oil pump.
Use the search button at the top of the pane and enter 'cam syncro'.
Many posts about this problem.
The following users liked this post:
PrettyPony (03-26-2022)
#3
09-28-2010
Join Date: Jun 2010
Location: OK
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
#4
09-28-2010
Join Date: Sep 2010
Location: willingboro
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
