Running rough
#1
Running rough
My truck is running rough, shaking slightly at idle and hesitating when accelerating. I thought it might be bad gas or something, but having gone through a couple tanks and adding some Heet it didn't help. Then I changed the spark plugs thinking that might do the trick but it didn't help either. Any other ideas?
#4
Highly unlikely a bad TPS, in OBDII, it has several reference points for voltage (KOEO, idle, 30 MPH, 60 MPH, etc), if it is not within the very tight tolerances (We are talking usually an acceptable range of .050v) it will trip a Circuit Malfunction DTC.
Given the carbon-harvesting nature of the 3.0, I would recommend removing the intake manifold, cleaning it by hand, remove the EGR valve sampling tube, cleaning it by hand, remove the IAC, cleaning it by hand and then finish it all off with a nice dosing of Seafoam.
Given the carbon-harvesting nature of the 3.0, I would recommend removing the intake manifold, cleaning it by hand, remove the EGR valve sampling tube, cleaning it by hand, remove the IAC, cleaning it by hand and then finish it all off with a nice dosing of Seafoam.
#5
Highly unlikely a bad TPS, in OBDII, it has several reference points for voltage (KOEO, idle, 30 MPH, 60 MPH, etc), if it is not within the very tight tolerances (We are talking usually an acceptable range of .050v) it will trip a Circuit Malfunction DTC.
Given the carbon-harvesting nature of the 3.0, I would recommend removing the intake manifold, cleaning it by hand, remove the EGR valve sampling tube, cleaning it by hand, remove the IAC, cleaning it by hand and then finish it all off with a nice dosing of Seafoam.
Given the carbon-harvesting nature of the 3.0, I would recommend removing the intake manifold, cleaning it by hand, remove the EGR valve sampling tube, cleaning it by hand, remove the IAC, cleaning it by hand and then finish it all off with a nice dosing of Seafoam.
Thread
Thread Starter
Forum
Replies
Last Post
ChargerOnDavins
2.9L & 3.0L V6 Tech
4
10-12-2023 03:37 PM
Mike_92
Drivetrain Tech
0
10-28-2013 09:26 PM
bonecrusher
SOHC - 2.3L & 2.5L Lima Engines
3
03-19-2011 04:04 AM