Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   2.9L & 3.0L V6 Tech (https://www.ranger-forums.com/2-9l-3-0l-v6-tech-32/)
-   -   Did I add too much oil? (https://www.ranger-forums.com/2-9l-3-0l-v6-tech-32/did-i-add-too-much-oil-132389/)

d1zturbe3d 03-20-2012 03:18 PM

Did I add too much oil?
 
I added oil to my truck today to top it off. The thing is that when I checked the oil level on the dipstick it marks almost at the M on the word MAX. Did I add too much oil to damage my engine? I guess I'm just a little paranoid.

Kris03 03-20-2012 03:22 PM

it really should be half way up the crossed section or between the 2 holes on some dipsticks.

SteelDirigible 03-20-2012 03:35 PM

if you're in between the marks then you're good.

d1zturbe3d 03-20-2012 04:20 PM

Well it's a little past the second mark (second hole) should I drain some oil out? Or is it alright? I just don't want to damage my engine by having too much oil in there.

StxDangerRanger 03-20-2012 04:47 PM

If its not like a quart too much, then you'll be ok. I usually run my truck with a fuzz over full, just for the fact that it burns a bit and more oil gets into the lifters that way.

Kris03 03-20-2012 05:04 PM

One option is to jus replace the oil filter. That usually drains almost a qt.

d1zturbe3d 03-20-2012 07:06 PM

It definitely isnt a quart over filled. I actually added a quart since it was at the minimum. It only about 1/4 from the second hole.

d1zturbe3d 03-20-2012 07:56 PM

This is exactly how much I'm talking about :
http://i1184.photobucket.com/albums/...d/40ea02a0.jpg

06RangerXLT 03-20-2012 07:58 PM

your fine

StxDangerRanger 03-20-2012 09:23 PM

I wouldn't be worried until you were WAY past that second hole.

d1zturbe3d 03-21-2012 05:28 PM

Alright thanks guys! I guess I'm fine then.


All times are GMT -6. The time now is 07:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands