i need more powar for my ranger edge i ownly want to spend 200 to 300 what can i get

 

tuner..

 

except they are $400....

 

start out with an underdrive pulley, and get an efan.. that's under $300 right there; with a decently noticable difference in power

 

Tornado air intake. They are only like 60 bucks and you will get a increase in fuel economy too.............................

J/K get a tuner

 

paint the intake yellow and wrap all the hoses w' yellow split loom tubing...

j/k

what do you need it for? day to day driving? or drag racing?

 

you could change the rear end gears for more get up and go.....you'd have higher cruising rpms though......

 

You can get a Jet Mass Air sensor for a little under $300. It should give your truck an extra 10-15 horsepower. Also, get a KN filter for a little over $40. Or a performance chip for around $237.

Here, I'll even give you a few links to buy those products:
Sensor: http://www.autoanything.com/air-inta...A1951A0A0.aspx
Filter: http://www.autoanything.com/air-filt...A2090A0A0.aspx
Module: http://www.autoanything.com/performa...A1777A0A0.aspx

(Note: Those are for the 2003 Ranger only. If you have a different year model, you will have to change the year on those sites.)

 

^yes and no, there are better ways to spend your money and gain more power, the sensor im not too familiar with but as far as i know they arnt worth it unless you have big power, a ranger just doesnt have that kind of power, there are free mods you can do to the maf that will help out, the k&n, sure, but a regular paper filter isnt to far behing performance wise, go with a MAC intake, seem to be a cheap intake that helps somewhat, jet chip, dont waste your money, save up alittle more and get the bama tuner...........best of luck

 

I'm not trying to be a jerk...especially to a fellow Canadian (unless you're in Vancouver, WA). But Vic dude...most of your threads have been repetitive about the same damn thing. Increasing powar to your 3.0, and you never follow up with everyone's responses.

https://www.ranger-forums.com/forum2...archid=1099517

 

i want some powar maybe i can get the vtec in my truck to kick in so i can look like the asian guy in my avatar

 

hah powar.. what a tard

 

awsome

 

Don't waste your money on performance mods!!! The only way to get a substantial increase in power is going to forced induction, PERIOD!!!!

 

yea not much you can do without spending some loot,either supercharger for $3,500,or spend like $2,000 in mods to pick up like 30hp from headers,pulley,tuner,etc..........dont waste the money

 

underdrive pulley kit from underdog or jusnes

 

4.0 ranger

 

AAHHHHHHH Bob Ayers is here

DO NOT GET A JET MAF or ANY other aftermarket MAF for a ranger, not only do they NOT make power, but they DONT work reliably and safely.

A tuner will be your best bang for the buck, but if 2-300 is really your limit, take a look at our Power Pack 2 combo, with a pulley, belt, and efan.

http://www.jusnesmodified.com/store/...roducts_id=272

 

^^ listen to the man!

 

If history repeats itself...we're not going to hear from Vic until he posts another "I neeeed POWAR!" thread.

 

^^^ ha ha ha

 

he brings up a good point though

it think we'd all like more powar

 

this is true, but very hard and pricey.....

 

looks like it so far