Neu-B question
#1
Neu-B question
Hey. I drive a 2001 Ranger xlt with auto and the 3.0 v6 and I only had it since last summer.
First question is that I have an "O/D off" switch on my gearshift. I noticed it increases my rpms up 1k more when the light reads "O/D Off" what is this really for and does it affect the gas mileage or hurt the engine after prolonged use?
Also a Midas mechanic pointed out that I have 4-5 Catalitic Converters in my exaust path. Can I live without all but one and still pass emitions? (Texas)
Thanks
First question is that I have an "O/D off" switch on my gearshift. I noticed it increases my rpms up 1k more when the light reads "O/D Off" what is this really for and does it affect the gas mileage or hurt the engine after prolonged use?
Also a Midas mechanic pointed out that I have 4-5 Catalitic Converters in my exaust path. Can I live without all but one and still pass emitions? (Texas)
Thanks
#2
#3
O/D is getting rid of your "cruising" gear. The only time you would want to turn of O/D is pulling a load, going up a steep grade, or into a very strong headwind. Basically, if your cruising on the highway and it keeps downshifting to 4th gear to mantain speed, this is when you want to shut off O/D...
#4
Yes, the OD saves you gas, but if your tranny is "hunting" back and forth between 4th and 5th gears (like in the situations others cited) then turning off overdrive saves some wear and tear.
Also, if you are going to be wanting to do some sudden, high speed passing, then turning it off before you get to that point eliminates some lag in the downshift when you really hit the gas. At some speeds, your tranny will want to shift back to 3 to pass and to come down from 5 to 3 takes more time than from 4 to 3 -- or so it seems to me. I use it that way sometimes.
The CAT's have been strung out like that for efficiency. It allows lower emissions with less restriction by stringing the catalyst out over a longer distance. The earlier smaller cats also pre-heat the exhaust gas (the catalytic reaction releases heat) making the big cat even more efficient.
It's not worth it to mess with it and it's always possible that emission standards will get tighter and then you'll really be up the creek.
Also, if you are going to be wanting to do some sudden, high speed passing, then turning it off before you get to that point eliminates some lag in the downshift when you really hit the gas. At some speeds, your tranny will want to shift back to 3 to pass and to come down from 5 to 3 takes more time than from 4 to 3 -- or so it seems to me. I use it that way sometimes.
The CAT's have been strung out like that for efficiency. It allows lower emissions with less restriction by stringing the catalyst out over a longer distance. The earlier smaller cats also pre-heat the exhaust gas (the catalytic reaction releases heat) making the big cat even more efficient.
It's not worth it to mess with it and it's always possible that emission standards will get tighter and then you'll really be up the creek.
Last edited by n3elz; 03-03-2005 at 09:57 PM.
#5
Thanks for all the info guys, it is really appreciated. I am a bit of a dunce with auto mechanics but Im willing to learn. This truck is my first "real" vehicle, save for my last Hyundai Accent and Dodge Shadow which are dead, gone, and forgotten. I'm hoping for a long love affair with this truck.
ps Leo: your truck is awsome, love the taurus-style emblem in the grille.
ps Leo: your truck is awsome, love the taurus-style emblem in the grille.
#6
Thread
Thread Starter
Forum
Replies
Last Post
Masteratarms93
General Ford Ranger Discussion
4
04-29-2010 01:18 PM
buggman
General Technical & Electrical
1
11-19-2008 11:00 AM
ranger_1999
General Ford Ranger Discussion
22
11-05-2008 08:31 AM