New Parts - check them out!
#1
New Parts - check them out!
Hey again! So i'm going to be doing some work on my truck soon and it will include.... hub assembly, tie rods, shocks, upper and lower control arm. I've been looking around and these are the parts that I decided on but I would like if someone with a lot more experience would double check my list to make sure it's all in order.
Check this list out if you have time I drive a 2006 ford ranger 3.0L xlt. I'm just looking to make sure it's all compatible and correct. It's a lot so thanks to anyone who looks.
two shocks so im thinking two of these
two inner tie rods ( I believe it's the same one for both sides, not side specific, right?)
two outer tie rods ( I believe it's the same one for both sides, not side specific, right?)
two hub's
lca passanger side
lca driver side
Check this list out if you have time I drive a 2006 ford ranger 3.0L xlt. I'm just looking to make sure it's all compatible and correct. It's a lot so thanks to anyone who looks.
two shocks so im thinking two of these
two inner tie rods ( I believe it's the same one for both sides, not side specific, right?)
two outer tie rods ( I believe it's the same one for both sides, not side specific, right?)
two hub's
lca passanger side
lca driver side
Last edited by teddy; 08-20-2013 at 08:07 AM.
#3
Thanks i've changed out my upper control arms on both sides now for ones with zerk fittings.
I'm not having any luck finding tie rods with zerk fittings I wanted moog but it seems that they make only the one for my truck... any suggestions or other brands you recommend? The moog tie rod says its greaseable. word for word it says "•Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear."
it that something thats a mess and I should just go with a brand that has a zerk fitting?
I'm not having any luck finding tie rods with zerk fittings I wanted moog but it seems that they make only the one for my truck... any suggestions or other brands you recommend? The moog tie rod says its greaseable. word for word it says "•Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear."
it that something thats a mess and I should just go with a brand that has a zerk fitting?
Thread
Thread Starter
Forum
Replies
Last Post
Scrambler82
Interior Semi-Tech
0
01-23-2010 07:42 AM
bwester04
General Ford Ranger Discussion
24
06-09-2007 09:29 AM