2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

clunking noise coming from belt?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-03-2006
barrman's Avatar
Member
Thread Starter
Join Date: May 2005
Location: San Diego, CA
Posts: 1,046
Likes: 0
Received 1 Like on 1 Post
clunking noise coming from belt?

truck has come alive with annoying noises ;o)

lately i've been hearing a very subtle clunking noise coming from my belt/pulleys somewhere. it is definitely not belt squeak, and it seems to be worse when i first start the truck. it is intermittent; you'll hear some "clunking" for a second or two, then it will be fine for a few seconds, then more clunking, etc etc. kinda sounds like loose or bearings or something... i dunno.

any ideas?
 
  #2  
Old 01-03-2006
BigEdge126's Avatar
Member
Join Date: Jun 2005
Location: Havertown,PA
Posts: 486
Likes: 0
Received 0 Likes on 0 Posts
how old is your belt ? maybe there is a chunk of rubber out of your belt somewhere.
 
  #3  
Old 01-03-2006
barrman's Avatar
Member
Thread Starter
Join Date: May 2005
Location: San Diego, CA
Posts: 1,046
Likes: 0
Received 1 Like on 1 Post
shouldnt be more than 30k... it looks intact upon visual inspection.
 
  #4  
Old 01-04-2006
Rand's Avatar
Member
Join Date: May 2004
Location: Barberton,Ohio
Posts: 1,189
Likes: 0
Received 0 Likes on 0 Posts
Was the Hvac set to off?
was the engine cold or hot?
 
  #5  
Old 01-04-2006
barrman's Avatar
Member
Thread Starter
Join Date: May 2005
Location: San Diego, CA
Posts: 1,046
Likes: 0
Received 1 Like on 1 Post
seems like the sound is much more obvious if the truck is cold. as far as the hvac controls, it doesnt matter if its on or off, clunk is still there.
 
  #6  
Old 01-05-2006
BigEdge126's Avatar
Member
Join Date: Jun 2005
Location: Havertown,PA
Posts: 486
Likes: 0
Received 0 Likes on 0 Posts
Hey, whatever happened with tour fuel pump?
 
  #7  
Old 01-05-2006
barrman's Avatar
Member
Thread Starter
Join Date: May 2005
Location: San Diego, CA
Posts: 1,046
Likes: 0
Received 1 Like on 1 Post
hehe fuel pump solved... it was the check valve in the sender assembly.

it's working flawlessly now (after a new sender heh)

nitrous coming in the next week or two :o)
 
  #8  
Old 01-05-2006
BigEdge126's Avatar
Member
Join Date: Jun 2005
Location: Havertown,PA
Posts: 486
Likes: 0
Received 0 Likes on 0 Posts
very nice!
 
  #9  
Old 01-05-2006
Rand's Avatar
Member
Join Date: May 2004
Location: Barberton,Ohio
Posts: 1,189
Likes: 0
Received 0 Likes on 0 Posts
Not enough info to help you..
maybe get a piece of fuel hose or a "mechanics stethoscope"
and listen around for the area of the engine its coming from.
 
  #10  
Old 01-07-2006
shwranger's Avatar
Member
Join Date: Aug 2004
Location: Omaha nebraska
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
hi

my truck makes the same noise and i think its coming from the power steering pulley... Like its stuck and then clunk fress up and starts spinning again then sticks again etc....
 
  #11  
Old 01-07-2006
GrafixGuy's Avatar
RF Veteran
iTrader: (3)
Join Date: Jan 2005
Location: Montgomery, AL
Posts: 8,703
Likes: 0
Received 1 Like on 1 Post
or it could be the timing chain it makes a loud clicking sound...which would me you really need to fix it soon or you have fun getting everything back in timing
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Green98Ranger
Drivetrain Tech
17
03-15-2016 12:26 PM
245Ranger
Suspension Tech
8
02-17-2011 01:43 PM
SteveOh
Drivetrain Tech
29
02-08-2007 08:33 PM
billj
Suspension Tech
1
11-06-2006 03:23 PM
Bailey
General Ford Ranger Discussion
13
10-28-2004 12:29 PM



Quick Reply: clunking noise coming from belt?



All times are GMT -6. The time now is 06:31 PM.