2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

Ticking noise?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-16-2009
Robin Hood's Avatar
Member
Thread Starter
iTrader: (2)
Join Date: Aug 2008
Location: AZ
Posts: 789
Likes: 0
Received 0 Likes on 0 Posts
Ticking noise?

I've noticed lately that when I'm sitting at a light idling, i can hear a ticking noise. It does it all the time, and it speeds up with the RPM. I haven't gotten to look at it with a stethescope but I was wondering if you guys had any ideas.
 
  #2  
Old 01-16-2009
Robin Hood's Avatar
Member
Thread Starter
iTrader: (2)
Join Date: Aug 2008
Location: AZ
Posts: 789
Likes: 0
Received 0 Likes on 0 Posts
Actually it doesn't do it when it's cold. At least it isn't right now
 
  #3  
Old 01-16-2009
Goodysgotacuda's Avatar
Member
iTrader: (1)
Join Date: Jul 2008
Location: Las Vegas, NV
Posts: 1,496
Likes: 0
Received 6 Likes on 3 Posts
Just throwing it out, but can be a slight exhaust leak thats expanding with heat.
 
  #4  
Old 01-16-2009
Join Date: Dec 2007
Location: Albuquerque, NM
Posts: 324
Likes: 0
Received 0 Likes on 0 Posts
Valvetrain, possibly a lifter knocking.
 
  #5  
Old 01-16-2009
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Likes: 0
Received 3 Likes on 3 Posts
You check your oil level lately?
 
  #6  
Old 01-16-2009
b3kbruiser's Avatar
Member
Join Date: Nov 2006
Location: DFW Area, Tx
Posts: 713
Likes: 0
Received 2 Likes on 2 Posts
Possibly the distributor is off-time, or on it's way out, are you getting worse/bad mpg? Seem like it has less power? Does it shake or wobble a bit when it's running? Otherwise, lifter knocking, worn valve guides, bent valve, maybe a valve spring, the serpentine belt could be frayed and the loose strand smacking against something, maybe a bearing in one of the pullies is going bad.
 
  #7  
Old 01-16-2009
Robin Hood's Avatar
Member
Thread Starter
iTrader: (2)
Join Date: Aug 2008
Location: AZ
Posts: 789
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by b3kbruiser
Possibly the distributor is off-time, or on it's way out, are you getting worse/bad mpg? Seem like it has less power? Does it shake or wobble a bit when it's running? Otherwise, lifter knocking, worn valve guides, bent valve, maybe a valve spring, the serpentine belt could be frayed and the loose strand smacking against something, maybe a bearing in one of the pullies is going bad.
Doesn't have a distributor. Power is fine. Pretty quick for a 3.0 if I may say so myself. Belt is brand new.
 
  #8  
Old 01-17-2009
TrucknGolf's Avatar
Member
Join Date: Nov 2008
Location: Colorado
Posts: 1,829
Likes: 0
Received 0 Likes on 0 Posts
BOMB>
 
  #9  
Old 01-17-2009
jeffb502's Avatar
Member
Join Date: Jun 2008
Location: Santa Maria CA
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts
I had a ticking noise a while ago...popped my hood and saw an off and on electrical arc going between one of my spark plug wires and the engine block. Replaced bad wire, ticking gone.
 
  #10  
Old 01-17-2009
Robin Hood's Avatar
Member
Thread Starter
iTrader: (2)
Join Date: Aug 2008
Location: AZ
Posts: 789
Likes: 0
Received 0 Likes on 0 Posts
New plugs, coil, and wires less than 1000 miles ago.
 
  #11  
Old 01-17-2009
mossyoak03's Avatar
Member
iTrader: (1)
Join Date: Oct 2006
Location: Virginia Beach, VA
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
how many miles are on your truck and have you ever had the timing chain and water pump replaced?
 
  #12  
Old 01-18-2009
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Likes: 0
Received 3 Likes on 3 Posts
Sounds like you've changed and replaced the obvious. Problem would lie within the engine then.
 
  #13  
Old 01-18-2009
Rangerkid's Avatar
Member
iTrader: (1)
Join Date: Jun 2008
Location: Livonia, MI
Posts: 489
Likes: 0
Received 0 Likes on 0 Posts
Sounds like Lifters. I have the same thing for my 4.0l. Seafoam it and see what happens, the ticking could be a carbon buildup on the valves also.
 
  #14  
Old 01-18-2009
Robin Hood's Avatar
Member
Thread Starter
iTrader: (2)
Join Date: Aug 2008
Location: AZ
Posts: 789
Likes: 0
Received 0 Likes on 0 Posts
Seafoamed a while ago but didn't put it in the oil.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mustangdave
DOHC - 2.3L Duratec / Mazda L Engines
6
09-14-2008 11:50 AM
Flippert
4.0L OHV & SOHC V6 Tech
1
09-02-2008 03:35 PM
leadfoot
4.0L OHV & SOHC V6 Tech
2
04-17-2008 09:44 PM
heaton84
General Technical & Electrical
8
11-18-2007 10:52 AM
rondog
General Technical & Electrical
11
04-26-2007 11:29 AM



Quick Reply: Ticking noise?



All times are GMT -6. The time now is 10:44 AM.