I am installing my roller rockers and I need to achieve top dead center. I already labeled my harmonic balancer at 0 120 and 240 and I know 0 is top dead center. My question is where do I rotate the 0 to?

Thanks,

Marc

 

i am old school take out #1 spark plug put in screw driver rotate engine till you find top dead center...

 

Should the 0 on the harmonic balancer be pointing up? down? left? right? is there a marker somewhere?

 

i just told you how i find it... only way i know..

 

i found top dead center please help with new problem

https://www.ranger-forums.com/forum2...ad.php?t=45137

 

 

There's two TDC's. It has to be during the compression stoke. FYI.

 

theres wasy to figure it out..

 

it took me a while but the screwdriver trick worked great. I had to take the spark plugs out anyways to make it ALOT easier to turn the crank by hand. I knew it was TDC because I could turn the crank a quarter turn in either direction and the number 1 piston push rods did not move.

Thanks for the help! I'm learning.

 

see he learned lol the old basic way works just fine!