93 3.0 skips bad
#1
93 3.0 skips bad
1993 3.0 112000 miles, replaced burned valve and associated gaskets. Idles good most of time. SKIPS often. Took it out the other night, after tinkering, ran like crap. One minute runs fine, then skips like crazy. New Cap, Rotor, Wires, plugs are fairly new. Timed to 10BTDC. Me and my buddy are scratching our heads. Any help is greatly needed and appreciated.
#2
Pull the plugs back out and check the insulators for cracks . Make sure you're using a plug socket with the rubber insert.
Re-gap the plugs down to ".042 as the ignition coil may be getting weak.
If the truck has been sitting a lot for several weeks , add a can or two of drygas to the tank , as condensation can build up quickly.
Re-gap the plugs down to ".042 as the ignition coil may be getting weak.
If the truck has been sitting a lot for several weeks , add a can or two of drygas to the tank , as condensation can build up quickly.
#3
Thread
Thread Starter
Forum
Replies
Last Post
LayingFrame89
Ranger Products, Company, & Member Reviews
34
12-01-2007 06:59 AM
ranger
General Ford Ranger Discussion
32
07-31-2007 11:50 AM