4.0l OHV 42 pinout
#1
4.0l OHV 42 pinout
Hey sorry for my english :) I'm from Poland
Could you sent me schematic/ pinout of 42 plug.
My car is from 1995 explorer 2
Here's a photo of the plug.
Need control signals from injectors and RPM signal.
I know i can get it from this plug.
I find something similar
https://www.ranger-forums.com/attach...ranger-pcm.png
Bad quality but something like this
Could you sent me schematic/ pinout of 42 plug.
My car is from 1995 explorer 2
Here's a photo of the plug.
Need control signals from injectors and RPM signal.
I know i can get it from this plug.
I find something similar
https://www.ranger-forums.com/attach...ranger-pcm.png
Bad quality but something like this
Last edited by kacperpol; 08-16-2017 at 03:50 AM.
#2
Tachometer RPM signal is on the wire that is color coded tan w/yellow stripe.
Injector control wires do not pass through the 42-pin. They are wired directly from the PCM to the injectors.
Sorry, I do not have the correct schematic for your Explorer 42-pin.
Injector control wires do not pass through the 42-pin. They are wired directly from the PCM to the injectors.
Sorry, I do not have the correct schematic for your Explorer 42-pin.
#3
#4
#5
Thread
Thread Starter
Forum
Replies
Last Post