91 Ranger will NOT start - Ranger-Forums - The Ultimate Ford Ranger Resource


4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
Old 07-30-2009
OmniRob23's Avatar
Member
Thread Starter
 
Join Date: Jul 2007
Location: WI
Posts: 14
91 Ranger will NOT start

Alright this is beyond annoying.
I litterally just painted my truck on Tuesday got a new windshield on wednesday and got the entire truck put back together today. Low and behold I start it up and It cranked over and cranked over and nothing. I have spark and I sure can smell fuel on the spark plug so why would it not start?

I also went to check codes and how confusing does it have to be? There was one sweep at the very begginning and a long pause. Is this a one or is that the start of the codes?

On that note if it isn't a one then the code I got said I have a bad clutch switch circuit failure.

If anyone could chime in with thoughts that would be great.

Last edited by OmniRob23; 07-30-2009 at 07:45 PM.
Reply With Quote
  #2  
Old 07-30-2009
chainfire's Avatar
Member
iTrader: (1)
 
Join Date: Oct 2007
Location: Mission B.C.
Posts: 3,126
If it is a bad clutch switch wire, the truck won't start. It isn't reading that the truck is in gear, and because of this it will not start.
Reply With Quote
  #3  
Old 07-30-2009
OmniRob23's Avatar
Member
Thread Starter
 
Join Date: Jul 2007
Location: WI
Posts: 14
I went back outside and tested the codes

I got a 67 then 95 then 67 then 95

It then quit and then flashed 95 two more times

The manual says 95 is Fuel pump circuit open- EEC processor to motor ground

and 67 is neutral drive switch orclutch switch faliure

What is this can anyone help?
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
only start on easy start kyde General Technical & Electrical 2 05-25-2014 06:17 AM
Incorrect jump start. Truck won't start now. Pilot General Technical & Electrical 3 10-27-2013 08:07 AM
Won't start, dome light dies when trying to start. Jerkstore General Technical & Electrical 4 10-02-2011 10:53 AM
Ranger hard start issue HELP COLD START 1994splash 2.9L & 3.0L V6 Tech 1 06-08-2011 05:27 PM
my danger ranger from start to well not finished just till now 84 GT 5.0 Snapshots 10 04-20-2009 05:10 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 06:51 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.