can i put a 01 motor in a 04
#1
#2
#3
RF Veteran
iTrader: (1)
'04 will be a 4.0l SOHC, and an '01 will be a 4.0l SOHC, so you are fine to do the swap.
Should be plug and play, unless '01 is from a 2WD, then you would need to swap oil pan and oil pump pick up tube to fit your 4WD.
'97 to '03 also had the older design timing chain, tensioners and cassettes, so unless it has been changed already I would do that while engine is out.
And you always changed the rear main seal on any engine swap
Should be plug and play, unless '01 is from a 2WD, then you would need to swap oil pan and oil pump pick up tube to fit your 4WD.
'97 to '03 also had the older design timing chain, tensioners and cassettes, so unless it has been changed already I would do that while engine is out.
And you always changed the rear main seal on any engine swap
#4
Thread
Thread Starter
Forum
Replies
Last Post
mp5raycer
General Technical & Electrical
1
09-20-2014 11:09 PM
TORQUERULES
Audio & Video Tech
10
08-09-2006 09:45 PM
RicksTJR
General Ford Ranger Discussion
13
07-19-2006 06:03 PM