4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

4.0 FIPK??????

  #1  
Old 11-10-2004
Level 2's Avatar
Member
Thread Starter
Join Date: Nov 2004
Location: Higginsville, MO
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Does anyone know how I can install a FIPK or equivalent air intake on my 2004 4.0?? Problem is that 2004 was the first year that they built the MAF into the airbox. Do I need to convert it back to a 2003 style MAF or is there something else I can do??? PLEASE HELP!!!!! I have been racking my brains out trying to come up with a solution. :?: :?:
 
  #2  
Old 11-10-2004
PickupMan92's Avatar
Member
Join Date: Jun 2004
Location: Orange City, FL
Posts: 1,601
Likes: 0
Received 2 Likes on 2 Posts
I would convert it back and buy a cheap MAC instake from Macperformance.com they are cheap and jsut as good as a FIPK.
 
  #3  
Old 11-10-2004
gatorblue92's Avatar
RF Veteran
Join Date: Jun 2004
Location: Delaware
Posts: 8,238
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by PickupMan92
I would convert it back and buy a cheap MAC instake from Macperformance.com they are cheap and jsut as good as a FIPK.
and they look much better too
 
  #4  
Old 11-10-2004
Join Date: Jun 2004
Location: Exit 105 New Jersey
Posts: 2,409
Likes: 0
Received 0 Likes on 0 Posts
Pic Hosting Request..

A conversion back to a 2003 might not be that easy.
The throttle body is a different size and the MAF sensor is totally different.
Aren't you satisfied with the performence gain from removing the air silencer?
Is it just about looks or do you think there will be additional performence gains?
 
  #5  
Old 11-12-2004
TheForce02's Avatar
Member
Join Date: May 2004
Location: Chino, CA
Posts: 846
Likes: 0
Received 1 Like on 1 Post
well i talked to my K&N guy again today and he says they are still working on all 04 intakes. he says they are having a hard time trying to find a design that is easy to install and design. also they have to make sure the tube design gives the most power
 
  #6  
Old 11-12-2004
Level 2's Avatar
Member
Thread Starter
Join Date: Nov 2004
Location: Higginsville, MO
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
I don't like the stock intake design. It just looks cheesy and Im sure that a smoother intake tube wouldnt hurt performance any. Hell I can't find but 1 aftermarket intake for my 2005 Focus ST either. I hate having cars with redesigns....always takes forever to get aftermarket.
 
  #7  
Old 11-12-2004
SuperSonicFX4's Avatar
Member
Join Date: Jun 2004
Location: Albuquerque, NM
Posts: 301
Likes: 0
Received 0 Likes on 0 Posts
Save your money, the performance u gain will be so small. I had an 01 with a FIPK Gen II than got my 03 and did the airbox mod. Noticed the same change, little better throttel response and more noise. But other than that it was the same.

Just my 2 pennys.
 
  #8  
Old 11-12-2004
FoMoCoFiddy's Avatar
Member
Join Date: May 2004
Location: Smackdownville Tx
Posts: 4,508
Likes: 0
Received 1 Like on 1 Post
i think the K&N makes a difference, you just cant feel it, it makes more of a difference on a supercharged cobra, then it would on our trucks...lol

I have the SSD, similar to the MAC, and when i throw the stock one back on, i feel the difference, and my stock one is chopped up...Its just louder...
 
  #9  
Old 11-14-2004
98blownranger's Avatar
Member
Join Date: Jun 2004
Location: manitowoc WI
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
KKM makes one for the 04 I belive.

curt
 
  #10  
Old 11-16-2004
Level 2's Avatar
Member
Thread Starter
Join Date: Nov 2004
Location: Higginsville, MO
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
KKM is now making an intake kit for the 04 4.0!!!!! I don't know how good it is but at least there is one out there on the market. It is a bit pricey compared to KKM's other intakes but $160 aint bad.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Werty
New Ideas
9
06-29-2007 10:07 PM
Msl747
2.9L & 3.0L V6 Tech
5
07-02-2006 10:41 PM
vansnxtweek
4.0L OHV & SOHC V6 Tech
9
08-23-2005 09:25 PM
vansnxtweek
4.0L OHV & SOHC V6 Tech
4
06-06-2005 09:21 AM
Werty
2.9L & 3.0L V6 Tech
10
11-08-2004 07:27 AM


Thread Tools
Search this Thread
Quick Reply: 4.0 FIPK??????



All times are GMT -6. The time now is 03:37 AM.