4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

Temperature Question

Thread Tools
 
Search this Thread
 
  #1  
Old 11-04-2010
k3k0a808's Avatar
Member
Thread Starter
Join Date: Aug 2010
Location: MIlilani HI
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Temperature Question

i have a 94 4.0 and i just recently changed my thermostat to a 190 from a 180, when i had the 180 the temp would stay below the N on the "NORMAL" gauge and when going up a hill get to about the "R" but never past the "M". Now that i have the 190 it goes up and down from the "N" all the way to the "A" is that normal? the temp goes up when i stop and it goes up and down when i drive... im just asking becuase im used to all my vehicles staying at a certain temp and if it goes up from there then thats when i know something is wrong
 
  #2  
Old 11-05-2010
btm757's Avatar
Member
iTrader: (5)
Join Date: Jun 2009
Location: Norfolk / Chesapeake, VA
Posts: 3,980
Likes: 0
Received 1 Like on 1 Post
Not sure if it is supposed to do it or not. My 93 3.0 did the same thing sitting at a light it would creep up then as soon as I move it would go back down.

If it worries you Turn the Heat on full blast and it brings the temp down
 
  #3  
Old 11-05-2010
billygoat's Avatar
Member
Join Date: Sep 2010
Location: lancaster pa
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
My 1990 belches every now and then when driven hot i turn the heater on full blast and it works. The best soultion is to put an electric fan on it. That will help keep your fluids cool and not reling on just one fan
 
  #4  
Old 11-05-2010
klc317's Avatar
Member
Join Date: Sep 2006
Location: Cincinnati, OH
Posts: 953
Likes: 0
Received 6 Likes on 4 Posts
I wonder if maybe it has an air bubble stuck in the cooling system? Maybe take off the radiator cap, start it up and let it idle for a while until the coolant gets warm and purge out the air.
 
  #5  
Old 11-05-2010
djfllmn's Avatar
Ford parts guy
Join Date: Mar 2009
Location: PA
Posts: 6,013
Likes: 0
Received 37 Likes on 30 Posts
Originally Posted by klc317
I wonder if maybe it has an air bubble stuck in the cooling system? Maybe take off the radiator cap, start it up and let it idle for a while until the coolant gets warm and purge out the air.
x2
 
  #6  
Old 11-05-2010
k3k0a808's Avatar
Member
Thread Starter
Join Date: Aug 2010
Location: MIlilani HI
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
I've purged it a couple times... I have a new radiator and waterpump but I looked closer and when the previous owner changed them he didn't change the hoses... So I'll change the hoses and flush the coolant and see what happens
 
  #7  
Old 11-06-2010
Join Date: Oct 2010
Location: Hampden Sydney
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
your engine is going to get hottest when you idle and coldest at crusinig speed. personally i would have kept the 180 thermostat if you are running a stock engine, however the 190 is fine. your engine will flucuate tempreature anywhere from 170 to 210 degrees depending on what you are doing.
 
  #8  
Old 11-06-2010
rolsmojave3's Avatar
Level III Supporter
Join Date: Jun 2006
Location: Wisconsin
Posts: 2,852
Likes: 0
Received 1 Like on 1 Post
You should compare the temps with another gauge or infrared temp gun, to see what it acutally is.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pubtime
DOHC - 2.3L Duratec / Mazda L Engines
8
03-25-2021 12:20 AM
heaton84
General Technical & Electrical
29
12-19-2010 11:10 AM
Gallo75
General Technical & Electrical
8
12-01-2008 07:15 PM
Roger
SOHC - 2.3L & 2.5L Lima Engines
1
06-01-2008 11:59 PM
Needforspeed3685
8-Cylinder Tech
4
12-09-2007 11:36 AM



Quick Reply: Temperature Question



All times are GMT -6. The time now is 04:13 PM.