4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

Screamin Demon, Plugs, and Wires

  #1  
Old 11-22-2008
JakeH05's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
Screamin Demon, Plugs, and Wires

I am considering getting a screamin demon coild pack with some underdog performance 8mm wires. What plugs have you guys had the most success with when used with the screamin demon? I was thinking maybe some bosch +4's or autolite double platinum's. Any suggestions?
 
  #2  
Old 11-22-2008
big-blue-oval's Avatar
Member
Join Date: Jul 2007
Location: alberta
Posts: 457
Likes: 0
Received 2 Likes on 2 Posts
i think that on our trucks, those are all pretty ho-hum mods.

i don't think the coil pack is appreciably better than what you already have. i'm pretty sure that the screamin' demon coil pack suggests a similar plug gap to what your truck uses factory. so in theory at least, there isn't much gain to be made there.

the wires likely won't make much difference unless you need to replace your existing wires anyways, then go for it.

asking about spark plugs always seems to start an arguement here, especially the bosch +4s. some people have said that it made their truck run like poop, and others claim no problems. there was a recent thread here about them, just look a little ways back in this same sub-forum.

all told, you could probably save this money for elsewhere.
 
  #3  
Old 11-22-2008
My91Ranger's Avatar
Member
iTrader: (1)
Join Date: Apr 2007
Location: Roseville, Michigan
Posts: 2,254
Likes: 0
Received 4 Likes on 4 Posts
I'm really diggin my NGK Iridium Plugs. Going to put a set on my dads van in a few hours.
 
  #4  
Old 11-22-2008
Takeda's Avatar
Level I Supporter
Join Date: Aug 2006
Location: Durham, NC
Posts: 3,657
Likes: 0
Received 7 Likes on 3 Posts
Your OEM coilpack will be way more reliable than the Screamin Demon due to the SAE testing that the Screamin Demon doesn't have. So, stay with the OEM coilpack, and Motorcraft double platinum, or finewire platinum plugs.
 
  #5  
Old 11-22-2008
Robin Hood's Avatar
Member
iTrader: (2)
Join Date: Aug 2008
Location: AZ
Posts: 789
Likes: 0
Received 0 Likes on 0 Posts
From what I've heard stay away from bosch for rangers. I'm getting the double plats for my truck.
 
  #6  
Old 11-22-2008
whippersnapper02's Avatar
RF Veteran
iTrader: (1)
Join Date: Sep 2006
Location: Earth, Milky Way Galaxy
Posts: 7,415
Likes: 0
Received 3 Likes on 3 Posts
The Screamin Demon pack has never caused any problems to their owners regardless of what testing has or hasn't been done to them. Good aftermarket products, like this coil pack, are designed to meet or exceed OEM specs. The pack also allows you to run a wider gap in the plugs.

I have not had a problem with Bosch plugs but others have. I am guessing it is because of quality control not product design. I run them in my truck now but I will not use them again. I will be switching to NGK Iridium plugs.

Id say you will only see gains from better wires and the better plug if you have a lot of other mods. But not all aftermarket products are inferior to OEM parts. They are probably better since OEM is not always the best and no matter how much "research" goes into OEM parts, the auto maker will usually make them cheap. Do recalls ring a bell?
 

Last edited by whippersnapper02; 11-23-2008 at 12:04 AM.
  #7  
Old 11-22-2008
Danger06Ranger's Avatar
Member
iTrader: (-1)
Join Date: Apr 2008
Location: Lowell, IN
Posts: 620
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Takeda
Your OEM coilpack will be way more reliable than the Screamin Demon due to the SAE testing that the Screamin Demon doesn't have. So, stay with the OEM coilpack, and Motorcraft double platinum, or finewire platinum plugs.
Why you always argue?
 
  #8  
Old 11-22-2008
JakeH05's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
yea i did some reading on here and it seems that most are very happy with their screamin demon coil pack. Its come time for me 2 replace plugs so i figure why not throw one on 2.
 
  #9  
Old 11-23-2008
Join Date: Sep 2008
Location: San Deigo, CA
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
The screamin demon coil pack is a good product. I us to use them on, before I create my own coil-to-plug set up
 
  #10  
Old 11-23-2008
wydopnthrtl's Avatar
Member
iTrader: (2)
Join Date: Dec 2005
Location: Ohio
Posts: 2,496
Likes: 0
Received 8 Likes on 6 Posts
One day I'll buy a SD coil pack. But for now I've increased spark strength via a different method.

I use a very high quality plug w/a smaller gap. Works fine for me in a daily driver way as well as spraying a 60hp shot of nitrous.

Check out my spark plug web page.

Rich
 
  #11  
Old 11-23-2008
Takeda's Avatar
Level I Supporter
Join Date: Aug 2006
Location: Durham, NC
Posts: 3,657
Likes: 0
Received 7 Likes on 3 Posts
Originally Posted by Danger06Ranger
Why you always argue?
Not arguing, just stating FACT that the Screamin Demon (made by Performance Distributers) DOES NOT do the recommended SAE reliability testing, or production testing that the OEM coilpacks get.

Check out these links, obviously there are many unhappy Screamin Demon customers:

http://www.ptcruiserlinks.com/forum/...tion-coil.html

http://www.ptcruiserclub.org/forum/s...s._P223718.htm

http://forum.aempower.com/forum/index.php?topic=18210.0

http://www.srtforums.com/forums/f42/...on-coil-31377/
 
  #12  
Old 11-23-2008
Takeda's Avatar
Level I Supporter
Join Date: Aug 2006
Location: Durham, NC
Posts: 3,657
Likes: 0
Received 7 Likes on 3 Posts
Originally Posted by fddriver02
The Screamin Demon pack has never caused any problems to their owners regardless of what testing has or hasn't been done to them. Good aftermarket products, like this coil pack, are designed to meet or exceed OEM specs. The pack also allows you to run a wider gap in the plugs.
?
Obviously, unless the SAE recommended testing is done, there is no way to determine if the Screamin Demon meets OEM specs or not! Do you ever wonder why the "OEM specs" are the standard?

And, check out this statement from NGK regarding running wider spark plug gaps with aftermarket ignitions:

"With this mind, many think the larger the gap the better. In fact, some aftermarket ignition systems boast that their systems can tolerate gaps that are extreme. Be wary of such claims. In most cases, the largest gap you can run may still be smaller than you think."
 
  #13  
Old 11-23-2008
whippersnapper02's Avatar
RF Veteran
iTrader: (1)
Join Date: Sep 2006
Location: Earth, Milky Way Galaxy
Posts: 7,415
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by Takeda
Not arguing, just stating FACT that the Screamin Demon (made by Performance Distributers) DOES NOT do the recommended SAE reliability testing, or production testing that the OEM coilpacks get.

Check out these links, obviously there are many unhappy Screamin Demon customers:

http://www.ptcruiserlinks.com/forum/...tion-coil.html

http://www.ptcruiserclub.org/forum/s...s._P223718.htm

http://forum.aempower.com/forum/index.php?topic=18210.0

http://www.srtforums.com/forums/f42/...on-coil-31377/
I don't see Ford Ranger anywhere in those threads. Also they are all old threads. I'm sure any problems have been ironed out since then.

Originally Posted by Takeda
Obviously, unless the SAE recommended testing is done, there is no way to determine if the Screamin Demon meets OEM specs or not! Do you ever wonder why the "OEM specs" are the standard?

And, check out this statement from NGK regarding running wider spark plug gaps with aftermarket ignitions:

"With this mind, many think the larger the gap the better. In fact, some aftermarket ignition systems boast that their systems can tolerate gaps that are extreme. Be wary of such claims. In most cases, the largest gap you can run may still be smaller than you think."
Obviously Ford has low standards since there are so many recalls on their OEM parts.

That statement about wider gaps may be false. But if you haven't tried it then how do you know? Trial and error. If it works cool and if it doesn't then all well. The world doesn't end if you try something and find no improvement.
 
  #14  
Old 11-23-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
I vote no on the +4's, or any bosch plug really.....i've always had bad luck with them. +2 or +4's, you are unable to set the gap. That's an issue...

Best plug luck i've had on my 4.0, has been the Autolite Double Platinums..APP5144.
 
  #15  
Old 11-23-2008
Join Date: May 2004
Location: CT
Posts: 0
Likes: 0
Received 3 Likes on 3 Posts
If this turns into another OEM vs Aftermarket fight, I will delete every response remotely related to it and bring the thread back to yesterday. So don't waste your time with this repetitive argument. It is getting old.
 
  #16  
Old 11-23-2008
JakeH05's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
Remind me not to bring this up again! lol I was just looking for plug suggestions or feedback on the screamin demon.
 
  #17  
Old 11-23-2008
Danger06Ranger's Avatar
Member
iTrader: (-1)
Join Date: Apr 2008
Location: Lowell, IN
Posts: 620
Likes: 0
Received 0 Likes on 0 Posts
Thank you.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lifted97ranger
4.0L OHV & SOHC V6 Tech
178
08-22-2019 10:19 PM
newfrank
General Technical & Electrical
2
07-01-2011 03:20 PM
Type_Ranger
General Technical & Electrical
6
06-10-2007 04:53 PM
DangaRanger99
General Ford Ranger Discussion
12
01-04-2007 04:44 AM
vansnxtweek
4.0L OHV & SOHC V6 Tech
1
11-08-2006 06:10 AM


Thread Tools
Search this Thread
Quick Reply: Screamin Demon, Plugs, and Wires



All times are GMT -6. The time now is 11:05 AM.