intake question
#1
#6
I made my intake using an AEM Filter($45), a piece of 3" exhaust tubing($5) and a little piece of steel plate(free).
check it out
Its a lil ghetto and doesnt replace the intake tube but it seems like it must be less restrictive then stock. I made a tube outa PVC Pipe but i have to work on getting the PCV line to stay in it and not fall out. Just needs a gromet of the right size but its been running great with it the way it is so wtf.
If ur interested and dont have access to a welder i would be willing to make these for people.
EDIT: I also did the MAF mod which probably helps a hell of a lot more then any bolt on intake u could buy.
Chris
check it out
Its a lil ghetto and doesnt replace the intake tube but it seems like it must be less restrictive then stock. I made a tube outa PVC Pipe but i have to work on getting the PCV line to stay in it and not fall out. Just needs a gromet of the right size but its been running great with it the way it is so wtf.
If ur interested and dont have access to a welder i would be willing to make these for people.
EDIT: I also did the MAF mod which probably helps a hell of a lot more then any bolt on intake u could buy.
Chris
#7
ABS Switch
Originally Posted by chipmonk010
I made my intake using an AEM Filter($45), a piece of 3" exhaust tubing($5) and a little piece of steel plate(free).
check it out
Its a lil ghetto and doesnt replace the intake tube but it seems like it must be less restrictive then stock. I made a tube outa PVC Pipe but i have to work on getting the PCV line to stay in it and not fall out. Just needs a gromet of the right size but its been running great with it the way it is so wtf.
If ur interested and dont have access to a welder i would be willing to make these for people.
EDIT: I also did the MAF mod which probably helps a hell of a lot more then any bolt on intake u could buy.
Chris
check it out
Its a lil ghetto and doesnt replace the intake tube but it seems like it must be less restrictive then stock. I made a tube outa PVC Pipe but i have to work on getting the PCV line to stay in it and not fall out. Just needs a gromet of the right size but its been running great with it the way it is so wtf.
If ur interested and dont have access to a welder i would be willing to make these for people.
EDIT: I also did the MAF mod which probably helps a hell of a lot more then any bolt on intake u could buy.
Chris
Thread
Thread Starter
Forum
Replies
Last Post
Toreador4x4
2.9L & 3.0L V6 Tech
8
07-16-2009 09:34 PM