Performance
what kind of power would I get from the following:
Bama Chip K&N cold air intake under drive pullies high flow exhaust Stroker Kit???? any thing else??? thanks |
With the bolt on stuff, youre looking at probably a 10% increase in power, give or take. Any more than that youll have to do internal engine work.
Your schedule on the mods depends on how much money you have to spend right away. The BamaChips tuner can be customized to include the other bolt on modifications if you do those first, but at the same time, the tuner will be the most bang for the buck. |
Yeah, if you ar elooking for performance and saving money in the process... go ahead and get everything but the chip first.. then get the chip and have it tuned that way. That will net you the most 'Gain" from the process.. which is just what I have been doing on my own truck. Taking my time and doing it right =)
|
do internal work if you want a real power gain.
supersixmotorsports.com has longer rods for the 4.0L Heads/cams, pistons, short blocks/long blocks. ect |
Alright thank you very much
|
I have all those mods except the crank being stroked. Check out my web page
Rich |
anyone try a cam in the 4.0 ohv? had a mac intake on my ranger didn't notice anything...an e fan maybe something else to consider?
|
Originally Posted by wydopnthrtl
(Post 972309)
I have all those mods except the crank being stroked. Check out my web page
Rich i know your moving more weight than i am being 2wd. but bone stock, i ran 15.6 in the 1/4. im not trying to be a d*ck or anything, just curious as to the actual benifits of all these "performance" mods available. the truck set up was, bone stock, 2k miles on it 3.55 gears 4.0L Auto. |
Originally Posted by 00 Ranger
(Post 971582)
what kind of power would I get from the following:
Bama Chip K&N cold air intake under drive pullies high flow exhaust Stroker Kit???? any thing else??? thanks |
Originally Posted by Urandaman
(Post 973962)
is your 1/4mile time after all the mods?
i know your moving more weight than i am being 2wd. but bone stock, i ran 15.6 in the 1/4. im not trying to be a d*ck or anything, just curious as to the actual benifits of all these "performance" mods available. the truck set up was, bone stock, 2k miles on it 3.55 gears 4.0L Auto. As far as the mods and thier value. The X-cal 2 and crank underdrive is where most of it comes from. The K&N does give a solid 10hp but only up over 4k rpms. The others are not worth it from a power perspective. Rich |
All times are GMT -6. The time now is 02:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands