Audio & Video Tech General discussion of audio and video for the Ford Ranger.

advice on amps help plez

Thread Tools
 
Search this Thread
 
  #1  
Old 01-17-2008
PatClarke's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: Nampa,ID
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
advice on amps help plez

so i am runing a 4 gage wire to my 1200w amp. witch is hooked up to 2 12" Subs. i want to add another 800w amp to power 4 of my infinity speakers. so i was thinking of using this spliter thing my friend gave me but the only thing is the 4 gage goes in but it splits it to two 8 gages to run to my amps. is this ok? or does my 1200w amp need a 4 gage to run with out hurting any thing. should i just add a second wire from my battery turmanel thats 8 gage to my 800w amp? and i also have a capacitor laying around should i take the time to charge and install it?
 
  #2  
Old 01-18-2008
Join Date: Mar 2007
Location: conneticut
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
dont mark my word on this one im not sure how the splitter would affect this... but i believe 8 guage is okay uptoo arround 1000-1200 watts.. i would run a separate 8 guage to the 800 watt amp, and keep the 4 guage for your 1200 watt amp, just to be sure everythings running at its best.
the cap would deffinatly be a good idea, considering your planning on running 2000 watts off of your battery
 
  #3  
Old 01-18-2008
Join Date: Jun 2004
Posts: 0
Likes: 0
Received 1 Like on 1 Post
Run 2 gauge for the 1200 watt, and 4 for the 800 watt.

http://www.the12volt.com/info/recwirsz.asp
 
  #4  
Old 01-18-2008
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
Likes: 0
Received 4 Likes on 4 Posts
get yourself a new FUSED splitter to put at your battery. run a 1/0 gauge wire from the battery to the splitter, then 2 - 4 gauge wires to each amp. FUSE the wires running to the amp in the splitter.

Something like this:


or you could fuse the 1/0 gauge wire and then run it back by the amps where you then will split it there and fuse the 4 gauge wires there.....
 
  #5  
Old 01-22-2008
PatClarke's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: Nampa,ID
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
thanx all of you for all your help i ended up running my 4 gage to my cap then out of my cap i did 4 gage to a spliter with a fuse in it and whent out with 8 gage to the two amps but reading what you all said i will upgrade all my wire when i get some more money :) i rely appreciate all your help.
 
  #6  
Old 01-23-2008
mmats69's Avatar
Member
Join Date: Jan 2008
Location: Montgomery, AL
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
the 8 gauge will hold them down until you can get something bigger so don't worry about it any
 
  #7  
Old 01-28-2008
nicholoff's Avatar
Member
Join Date: Sep 2007
Location: LANSING, MI
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
trust me i have installed many 2 amp system with 4 gauge. gauge is the smallest i install. i used to have a jl 500/1 and 300/4 running off of 4 gauge into a fused splitter to 8 to the amps.in our trucks the runs arent far so 4 gauge your fine.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
imprezu
Suspension Tech
0
11-15-2010 12:57 PM
Masteratarms93
General Technical & Electrical
5
08-12-2010 04:49 PM
WowMike2001
Audio & Video Tech
11
09-04-2009 07:36 AM
maine_2003fx4
Audio & Video Tech
9
09-25-2005 02:26 PM
james13f
Audio & Video Tech
18
04-12-2005 11:47 PM



Quick Reply: advice on amps help plez



All times are GMT -6. The time now is 07:21 AM.