so does anyone else have this unit and if so did you get the trim on i cant for the life of me get the trim on i was thinking a dremeling it slightly bigger but its so flimsy im afraid i just tear it apart... im using the scoshe fd1330b kit has anyone used a different kit that works with the 4200dvd i think i read somewhere about the trim not fitting i think if i do get it on the second i open it its gunna pop it right off

 

avh-4200dvd sorry

 

i just finished it up i just cut the sides off dremeled them down a little bit so they fit and hot glued them in then behind the unit i wrapped electrical tape around the gap at the top and bottom to blacken the area out and you cant even tell the gap is there it came out nice ill upload some photos soon

 

 

looks good! how are you liking it? i was watching some vids yesterday on it and it looks like it is a decent bang for the buck. I dont want to fork out the 700$ for the 920 just for the ole ranger.

 

i love it its amasing i had another pioneer single din headunit which had 5v preamp outs and this only has 4v so i was expected some audio loss but actually it sounds amasing picture is great have a rearview camera hooked up which looks perfect aswell as a wd media harddrive player couldnt be happier will upload some more pics soon

 

also with this deck you cant fit the trim kit around it and still be able to open the unit so dont try lol i spent like 4-5 hours dremeling the trim down to just give up and cut it up all you need is the left and right side as seen above this is a bad pic but in the truck you cant even tell looks amasing just hot glue the two sides in looks great

 

also for like 400 for this unit is unbeatable... cant beat the fact that you can add on the gps after for like 200-250 where else can you get a 7in touch screen with gps for under 650... yet alone a pioneer... lol asked my girlfriend for the gps add-on for christmas, lol hopefully she will come threw

 

nice man! yeah i love mine so much

i had the same install kit and had no luck with it. didn't care enough to modify it to fit.

 

im so **** about stuff like that i just couldnt leave it without trim i was boarderline going to send it back and get the 3200bt

 

wouldnt have helped i ended up moding mine the same way my screen dosnt pop out like yours but the corners are sharp and the trim ring corners are round which made it bow at the top

im thinking about picking this up instead
Amazon.com: Metra 95-5817 Double DIN Installation Dash Kit for Select 1995-2008 Ford, Lincoln, Mercury, and Mazda Vehicles: Automotive: Reviews, Prices & more

 

with the 4200dvd i dont even that would work lol it was so wide i had to dremel down the side trim pieces 1/16 - 1/8 of an inch to clear it im happy enough with my results.. hot glue is my best friend lol

 

 

does your camera have that little display built in or something?

because with mine, idk where to stop. i mainly use it for backing up in dark areas because the camera allows me to see behind me. but my depth perception with it is all fvcked up

 

yea the camera has two jumpers on it one to turn those markers on and off and the other to flip the image right now im still unsure wheather or not ill keep the markers theyre not but not quite accurate works nice tho

 

Lock Pick Bar-Cam 221 Rear View Backup Camera - BARCAM221

 

thats the camera im running works really nice clear pic day and night i just need to get tamperproof bolts for it cuz its pretty easy to steal right now lol right behind it it just unplugs so they wouldnt even need to cut the wires

 

i didnt use the scosche kit i used metra,the metra kit was fine for me.

 

with the 4200?

 

yes with the 4200 havent logged on in awhile sorry.

 

How is this Camera working out for your.

Does it plug in and go ?

I purchased the 120BT and didn’t get the camera but want one and I think the Pioneer doesn’t have the lines and I think that is a good option.

Maybe set up the lines on a switch to turn on and off as needed.

Thanks for the posting, getting me going to get a Camera.

ltr

 

yea it just plugs into the rca camera input and i have it wired to turn on with in reverse i have no need for it on all the time just burns out the camera faster but with the lines on a switch thats actually a really awesome idea i never thought of that all it is to turn them on and off is a jumper coming off a pigtail on the camera one thing i dont like tho is when the lines are off it will still display stop on the bottom looks outta place so i just leave the lines on