Fiberglass boxes
#1
Fiberglass boxes
Anyone built speaker/sub boxes using the vacuum bag technique of fiberglassing? I.E. building a plug(undersized for the part), release agent over that, lay up the glass, bag over everything and suck it down tight, let cure?
thinking about doing it for my friend's 350z instead of building a wood box(gonna need some serious curves to make look good, which is going to be hard with wood. I'm thinking that I can melt the plug out of it through the sub holes.
I'm also thinking wood backing for the amp and wood rings for the subs, both probably 1/2" Marine plywood. Anyone see any issues here?
thinking about doing it for my friend's 350z instead of building a wood box(gonna need some serious curves to make look good, which is going to be hard with wood. I'm thinking that I can melt the plug out of it through the sub holes.
I'm also thinking wood backing for the amp and wood rings for the subs, both probably 1/2" Marine plywood. Anyone see any issues here?
#2
Just an idea....
http://forum.edesignaudio.com/showth...highlight=350Z
Came out real nice, and if you are handy with the glass, should be an easy one.
http://forum.edesignaudio.com/showth...highlight=350Z
Came out real nice, and if you are handy with the glass, should be an easy one.
#3
Thread
Thread Starter
Forum
Replies
Last Post