Finally built new box (pics)
 

This time, I made one box and put it on the passenger side so I would have more leg room. I used 3/4" MDF this time. Its right around 1.00 of airspace, which is the max for the sealed box specs for the kicker sub. I cant believe how much deeper it hits now. It is also LOUD. 1 10 is definantly enough. Now I just need to carpet it and finish it up.

Very nice! I knew that sub/ amp would work out for you!

Looks good.I want a sub & amp so bad!

Any grill to keep the passenger seat off the sub?

no

well what are you waiting on? lol

i can't wait to build my box for my L5!!! mine will be ported tho. then i gotta get a decent amp for it. but its all lookin good.

does the passenger have any leg room?

Sometimes I wonder just how much power these subs can handle. The RMS power for the 12" L5 is 600w. I have close to 650wrms to my 12" and it seems to gobble it up and ask for more.

I have a mild case of buyers remorse with my Alpine MRD-M605; I wouldn't mind having that Kicker ZX750.1 you have on your 10" L5. I know the prices were very similar between the M605 and the ZX750; the only reason I didn't pick up the Kicker was because I knew they pump out ~900wrms. If I could do it again, I'd have gotten the ZX750 and adjusted the gains responsibly.

But oh well.

Nice set-up you have there. I wonder how the 10" L5 on that ZX750 sounds in comparison to my 12" L5 on the M605.

Bet it's plenty loud in that single cab!

Ok, so I guess no bass with the seat in it's back position? If you have no grill then just put a ledge onto the box. That way the passenger seat will not come into contact with the sub during excursion, and the seat will also help to hold the box in place for a better sound.

The box is the same depth as my old box that was on the drivers side, so yea, the passenger will have as much leg room as I had on the drivers side before changing boxes.

I have the seat adjusted so that the sub wont touch the seat.

any pictures of it with your seat in normal position? want to see how much room you got when you're sitting in the truck.. very nice job!

I'll try to get pics soon, but on the drivers side, you can adjust the seat pretty far back and lean the seat back all the way against the back glass.

How much space did the passenger seat lose? How far did it move forward? I am bout to get one put in.. but I am so unsure.. I dont wanna lose to much room.

Thanks

not much really, i'll get some measurements too.

That would be great man.. I am really exciteced to do mine.. but cant decide

looks good

Try going with fiberglass, me and a buddy of mine were able to fit two l7 10's in a single cab. we only had to move both seats up one notch which left plenty of leg room. Ill try to get some pictures up of his truck as soon as i can but until then hers some pics of other boxes ive made.
its a lot easer than it looks, and im 16. Heres where i learnt how to build them, its a great site.. http://www.the12volt.com/installbay/...TID~74519~PN~1

my first one
http://i8.tinypic.com/5zf8b9w.jpg
For a honda civic
http://i16.tinypic.com/52w681c.jpg
For a single cab Z71
http://i14.tinypic.com/6d0hobk.jpg

Just be creative and have some fun. Good luck!

I have 2 10 inch dB-500s and I lost no leg room. All behind the passenger seat.

I got a extended cab and love it lol...my L5 came with a hatch back vented box and i whooped everyone at my high school with only a 200 watt kicker amp, now i have a 500 kenwood amp and beat half the town on bass...cops love me, 4 sound violations, 1 of which my stero was on 11 volume and i was rattling walmarts windows, need to get a kicker vented box...u wont have any complaints

really nice dude!! love the setup.