HELP with 2003 svt focus subwoofer audio installation!! wiring diagram needed too!
i know, i know, it's not a ranger, but i'm desparate for help, and the focus forums i've joined are pretty much useless.
i have a 2003 svt focus, with the 9006 audiophile headunit and OEM outboard amplifier and 8" subwoofer in the rear hatch area. i have left the stock headunit to leave everything looking OEM, and installed a rockford fosgate 3sixty.2 sound processor. i have succesfully interfaced it to the 4 speaker channels, but i'm struggling with the subwoofer channel. the audiophile headunit has 3 harnessses coming from it... one is for the 4 speakers (8 wire harness), the second has power, ground ,12v switched, etc. the 3rd harness has subwoofer wires and steering wheel control wires. i can't figure out which wires to use to interface the subwoofer signal into the 3sixty, and i don't know if the signal wires coming from the headunit are low level or high level. from what i've read on other forums, there appears to be 4 wires related to the amplifier... a white/red stripe (remote turn on), white/black stripe (sub signal +), gray/black stripe (sub signal -) and brown/yellow (shield). i'm currently using the white/black and gray/black to interface into the 3sixty high level sub +/- inputs, but the signal is VERY weak. i've also tried using the brown/yellow as negative and seem to get the same results. i'm not sure what to do with the 3 wires, if i should leave one hanging and just use two, or even which one is which for sure. a wiring diagram would be HUGELY helpful! ANY help any of you gurus can offer would be really appreciated! |
I have some diagrams for doing that around here somewere. I will see if I can find them so bare with me cause I havent used them in a little while (I sold my SVTF over a year ago).
|
k sweet thanks man
|
PM me your email cause I can send you a complete diagram if you want.
|
All times are GMT -6. The time now is 09:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands