Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   Audio & Video Tech (https://www.ranger-forums.com/audio-video-tech-41/)
-   -   NEED HELP!!! need to install new Cd player (https://www.ranger-forums.com/audio-video-tech-41/need-help-need-install-new-cd-player-77846/)

01edgeMan 01-10-2009 08:09 PM

NEED HELP!!! need to install new Cd player
 
I currently have the CD-6 system in my 01 Edge. The volume knob won't turn the volume down. So, I have decided to replace the piece of junk. Here's the problem: I have absolutely no idea how to remove the CD-6 system. If someone could help me get started on removing the thing I know I can get the new one in.


Thanks

04blackedge 01-10-2009 10:01 PM

Its easy, right above the HVAC panel is 2 7mm screws, remove those and take the whole bezel off. Then just push in the 2 metal pieces holding the radio in at the sides and slide the radio out the front. Make sure to unplug the wiring harness and antenna too. Or you could go to any auto parts store and get the ford radio removal tools but I find this way easier and free.

SB05EDGE 01-11-2009 07:44 AM

you can do that or if you can find a place that sells the radio removal tool to get it out......either way works though.

04blackedge 01-11-2009 11:03 AM

I said that too, look at the last sentence

seth556 01-11-2009 11:44 AM

Let me be the first to say that you can go to any place that sells radios and for about $5 you can get factory radio removal tools that you can use to pull the radio out.

nicholoff 01-11-2009 06:15 PM

fords are a pain to get out. just remove the screws and popout the bezel grab a flat blade and push the clips and ur done. 20 seconds literally it takes me, drill and flat head. i also professionally install so that helps

04blackedge 01-11-2009 06:28 PM

I just push the clips with my fingers


All times are GMT -6. The time now is 10:39 PM.


© 2024 MH Sub I, LLC dba Internet Brands