Rockford Fosgate P2l-110, Which amp?
I will be installing the Rockford Fosgate P2L-110 sub and enclosure in my ranger once it arrives in the mail. And i have looked and looked but no body can seem to tell me which amp to get? I want all Rockford stuff but Audio/Video is all greek to me. Heres the stats:
Description Value Woofer Quantity 1 Woofer Size 10" Woofer Series Punch Stage 2 P2D210 Woofer Impedance (ea) 2-Ohm DVC Final Amp Load: 4-Ohms (coils wired in series) Power Handling 200 Watts RMS 400 Watts Max System Configuration Ported Enclosure Material 5/8" MDF (Medium Density Fiberboard) Speaker Connector Up To 4 AWG Binding Post Shipping Weight 42.50 Lbs. (19.27 Kg.) Dimensions H 13.5" x W 17.25" x D 16" (34.3cm x 43.8cm x 40.6cm) |
i have a dual 460 watt amp that im sure would push that fine. right now its pushing 2 12", its a realtively cheap amp and if it can push my two 12's it will push ur 10. also if you wanted to add another sub you would be able to on that same amp
|
i have a 500 watt amp powering my p3, and its a lot of power, but if you went with something like a 300 to 500 watt amp you should be fine with the size of your sub. and a buddy of mine has 300 watt amp powering his 12" p2, and it sounds great. so i think you would be good in between the 300 to 500 watt range.
|
ok cool thanks for all your help guys. I also posted this same question on Rockford Fosgates forum so I'll let you know what those guys say.
|
actually if you wanted to spend alot of money you could actually set up your sub for 1 ohm but you would have to get an amp that was one ohm stable
|
run a rockford fosgate P300-1 its perfect. and not to expensive!
|
oooohhh and the P300-1 pushes 412 RMS
|
All times are GMT -6. The time now is 06:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands