Ok so ill start from the beg. I was drving to work one day and my subs cut out hit a bump and they flicked back on...no problem figured it was a loose wire sure enough it was one of the screws were loose on the amp so i tighted everything up, all is good... Then a week or so later sub starts to cut out agian so i checked all my wires and they were all tight! So i was a lil lost there then they started to play when i turned my deck up a lil... so they wont play at low volumes anymore not a big deal. BUT now THEY DONT PLAY AT ALL!! amp light is on....wires are tight... i dunno what else it is.... and thanks in advance(sorry for the long post!)

 

I recently just had one of my subs do that and I thought I blew that sub for some reason. It turned out the wire inside the sub box came off. Wierd! Just a thought, or maybe sub control (if you have it) is off?



Allen

 

I've had the problem once or twice. Check your inline fuse and "wiggle" it while the radio and all is on, i've had the fuse block actually have a short in it somewhere. Check your ground connection too