where to put a sub
#1
where to put a sub
i have a ten inch infinity sub, and was looking at boxes online but can't find one that i want. im trying to keep as much room as possible in my backseat, so i was thinking of making a custom box to place where my jack is currently. i have an 01 ranger edge, extended cab. has anyone done this or have any other ideas?
#2
#3
sub is an infinity reference 1040w, has a mounting depth of 4 and 9/16 in, cutout diameter of 9 1/8 inch and outer diameter of 10 3/8 inches. i dont know too much about subs, so here is a link to a site with more info.
http://www.crutchfield.com/S-cdrEyfu...eference+1040w
http://www.crutchfield.com/S-cdrEyfu...eference+1040w
#5
Originally Posted by RentonRanger
I have 2 8's in a standard ported boxk sliding around in the back and takes up almost all the room and just doenst sound like a 10" or 2. But they were free or least came with the truck so I cant complain...just want something better.
#6
That box is sweet. How far out from the stock jump seat backrest does is sit? I want to do that, but I still have a few years of hauling growing kids around back there (they are already starting to complain about the jumpseats)
Back to the original question though, On my old 95 I built a box that ended up flushing out the dip in the extra cab, right behind the front seat to the back of the cab.
Back to the original question though, On my old 95 I built a box that ended up flushing out the dip in the extra cab, right behind the front seat to the back of the cab.
#7
#9
Originally Posted by bgrd351
I want this box bad. do you have the diagram for building it? And where did you stick the amp?
I have 2 8's in a standard ported boxk sliding around in the back and takes up almost all the room and just doenst sound like a 10" or 2. But they were free or least came with the truck so I cant complain...just want something better.
I have 2 8's in a standard ported boxk sliding around in the back and takes up almost all the room and just doenst sound like a 10" or 2. But they were free or least came with the truck so I cant complain...just want something better.
Originally Posted by RentonRanger
#12
I can do a "How To", but there wont be much as far as pics go. I didn't think to take any as I was bulding it. What I can do is take the finished measurements and overlay them on the finished box. Give me a little time and I will get this done as soon as I can, then I will post it in the "How To" forum.
#14
Alright guys, here ya go!! Hope I included everything you need. If not, just let me know.
Sub box How To
Sub box How To
Thread
Thread Starter
Forum
Replies
Last Post