help ?
 

how to clean this ??? it is on inside of the thing at least i think it is... :evil:
Attachment 213278

take the dash apart and clean it form the inside

All you need to do. take off the front radio bezel. 2 screws above the A/C nobs. Onces thats down, its not mandatory but take off everything below the steering column. Once thats out, right infront of the guages, above it, you can remove those screws, 3 of them. Once those are out, you can rip out that black piece and than the guages will be visible. There will be 4 bolts, two on each side. As soon as those are out, the guage will be free. You can pull it out a bit and than unhook the three wiring kits in the rear. Take the guage out and than you can remove, I think its about 8 screws and the whole plastic front piece will come off and you can clean. Sorry for the stupid wording but its not complicated once you see what your dealin with.

http://69.93.192.198/ranger/IMG_0246.jpg Thats the A/C ones.

And than the top 3. Sorry, these are the best pictures I couild get, I really didn't want to rip up the panel tonight. If you need to, I can take it apart tomorrow. http://69.93.192.198/ranger/IMG_0247.jpg

THANKS man and i can mangage with those pic thanks a bunch..... will try to do that this weekend ...... :hug: :rfrocks: :numanuma[

sweet, good luck. I got 2003 Ranger Cluster and first thing I did was open it and cleaned it really well and armor alled the black plastic, looks flashy :) Hope it turns out good.