Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

95 Trans problems.

Thread Tools
 
Search this Thread
 
  #1  
Old 04-24-2014
fbccars924's Avatar
Member
Thread Starter
Join Date: Apr 2014
Location: Alton, Il
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
95 Trans problems.

My Father has a 95 2.3 2wd Auto and it's having serious issues once the engine warms up.

It will be sluggish into gear initially then it flares between gears and it overheats under normal driving.

It has been all but rebuilt. Replaced solenoids, filter fluid and flushed the cooler. It was suggested that the TPS might be to blame (fingers crossed).

Any ideas? I am at a complete loss.
 

Last edited by fbccars924; 04-25-2014 at 11:08 AM.
  #2  
Old 04-25-2014
fbccars924's Avatar
Member
Thread Starter
Join Date: Apr 2014
Location: Alton, Il
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Anyone? I mean I'm seriously trying to help my Pops out.
 
  #3  
Old 04-26-2014
cheese_man's Avatar
Member
iTrader: (1)
Join Date: Nov 2009
Location: arthur
Posts: 2,126
Likes: 0
Received 4 Likes on 4 Posts
is the tranny cooler built into the radiator or is the cooler a separate unit

is the engine radiator the original 1 or a replacement , your engines radiator may be seriouly plugged up

open the radiator cap when the engine is cold , start engine , what the coolant flow as the engine warms

does the coolant flow good , or does the coolant just sit at the top of the core tubes,

i suspect that the radiator core tubes are plugged up from coolant calcifying from the heat

time for a replacement radiator
 

Last edited by cheese_man; 04-26-2014 at 03:22 AM. Reason: added wording
  #4  
Old 04-26-2014
fbccars924's Avatar
Member
Thread Starter
Join Date: Apr 2014
Location: Alton, Il
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Ok, I'll have to look. It would make sense because the engine warms up quick and it gets seriously hot.
 
  #5  
Old 04-26-2014
cheese_man's Avatar
Member
iTrader: (1)
Join Date: Nov 2009
Location: arthur
Posts: 2,126
Likes: 0
Received 4 Likes on 4 Posts
the reason why i asked these questions is?/

14+ years is way too long for a factory radiator to effectively cool an engine

i usually replace a radiator every 4 to 5 years regardless of exterior condition

if the factory radiator has the brass tanks , then you would be better to just get the core replaced

because brass tanks are better than plastic tanks
 
  #6  
Old 04-26-2014
green99's Avatar
Member
Join Date: Apr 2010
Location: OR
Posts: 199
Likes: 0
Received 1 Like on 1 Post
Originally Posted by cheese_man
the reason why i asked these questions is?/ 14+ years is way too long for a factory radiator to effectively cool an engine i usually replace a radiator every 4 to 5 years regardless of exterior condition if the factory radiator has the brass tanks , then you would be better to just get the core replaced because brass tanks are better than plastic tanks
If your vehicle is properly serviced a factory radiator will last for the life of the vehicle. Sometimes stuff happens and they need to be replaced, but swapping them for no reason is a waste of money. IMO :)
 
  #7  
Old 04-26-2014
cheese_man's Avatar
Member
iTrader: (1)
Join Date: Nov 2009
Location: arthur
Posts: 2,126
Likes: 0
Received 4 Likes on 4 Posts
not necessarliy if his fathers engine cooling system is still using the prestone lime green coolant

that coolant was notorious for causing calcifying deposits to form in the radiator tubes and plugging them up
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
firebirdude
General Ford Ranger Discussion
18
06-15-2017 07:08 AM
Muleskinner
Drivetrain Tech
2
05-03-2015 04:16 PM
BlackRanger04
Drivetrain Tech
26
12-05-2010 10:17 PM
silverfox
Drivetrain Tech
0
12-18-2009 04:20 AM
lifted97ranger
General Technical & Electrical
3
01-23-2008 11:48 AM



Quick Reply: 95 Trans problems.



All times are GMT -6. The time now is 02:00 PM.