2004 Ranger 4x4 issue
I have seen a few topics that have been somewhat helpful with my issue but nothing that has 100% fixed my problem. One day I realized that my 4x4 was not engaging. As well as the 4x4 light on my dash was not working. I replaced a fuse and the light started working but still no 4x4 engaging. Last week I replaced the transfer case shift motor. As of right now it is still not working. When I turn the switch the light on the dash lights up and I can hear a clicking behind the switch. I am not sure what else to try. I was thinking maybe replacing the control module? Any advice would be a great help. Also I should note that I have been neglecting the truck the past few years and I have had to jump it a few times. I read somewhere that that might cause some electrical issues.
|
1 Attachment(s)
Welcome to the forum
Below is the 4WD wiring diagram You will see the fuses to check The Ranger 4WD control modules did fail, but could be a fuse Usually if 4WD lights flash on and off it means shift motor issue So no flashing means module issue |
All times are GMT -6. The time now is 06:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands