3L automatic transmission interchange
 

Hello all, I'm new to the group. Thanks for letting me join. I have a 2003 Ranger Edge ,2wd automatic. It has a bad transmission. I'm wondering if any of you can tell me how many different years of transmissions I can use. Pretty sure it's a 5R44E. There may be a few in my local junk yard. But I don't know what years I can use. Any help would be appreciated.
Thanks

Yes, 2002 Ranger 2.3l or 3.0l will have 5R44E, 4.0l used 5R55E

A transmission has a Bell Housing that is specific to the engine it was on, engines bolt pattern

3.0l Vulcan engine has a unique bolt pattern, so 5R44E from a 2.3l won't fit the 3.0l

You can change bell housings but on an automatic the rear of bell housing is the Main Pumps front case so not a simple thing to do

2002-2008 5R44E from a Ranger 3.0l 2WD will work
Mazda B3000 2WD in the same years as well, same 3.0l engine and 5R44E transmission
2008 was last year Rangers used 3.0l Vulcan engines

4WD can not be converted to 2WD(or visa versa) without full disassemble and changing of the main shaft, rebuilding yours would be more economical, lol


If this is your first automatic trans install then a big HEADS UP!!!!!!!
Torque converter MUST BE seated on the input shaft and slid back into the bell housing as far as possible to align with main pump, or you WILL ruin the tranmission
No do overs
Did it wrong on my first automatic 40 years ago, a common first time goof and an expensive one

Thank you very much, I was worried I could only use one from 2003. I had heard they were an exclusive year, and that the ECU wouldn't except any other years.

I don't see and wiring differences on the diagrams I have

You can look at Hollander Parts, used parts look up

2003 3.0l 2WD wiil have (ID 2L5P AB) tag number

Seen here: https://www.hollanderparts.com/used-...sion-transaxle

Select: AT, 5R44E, 6 183 (3.0L), 4X2, (ID 2L5P AB)

Then enter your zipcode to see whats available