Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

Brake suggestions

Thread Tools
 
Search this Thread
 
  #1  
Old 03-30-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
Brake suggestions

Ford says my Front pads are 90% worn, Duhhh! I told them the brakes are hooking up funny and have poor braking SO

while my truck was at Ford they wanted either
99 For pads
49.99 to machine each stock rotor
Or
99 for pads and
140 for drilled rotors

Pretty much told them to shove there motorcraft pads.


So what are you opions on the HAWK pads, which ones are the best of the 3?
Is there a place to buy them cheap locally or should I oder through summit and get raped by shipping to canada.

Here's the 3 types

HP super duty http://store.summitracing.com/partde...5&autoview=sku

HPS http://store.summitracing.com/partde...5&autoview=sku

LTS http://store.summitracing.com/partde...5&autoview=sku






Im thinking about these rotors to go with them, Does anyone know how these hold up and how they are off road and stuff compared to OEM?

http://store.summitracing.com/partde...641+4294839009

is there a cheaper place to buy and locally? Napa?
 
  #2  
Old 03-30-2009
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
I ran the Hawk HPS pads for a good while.....BUT...created alot of brake dust and started to squeel after about 20k.


Right now I'm running Stoptech slotted rotors with Posi Quiet pads. Got 'em from ModBargains for about $300 shipped and they perform GREAT! Very very low brake dust and I noticed a very good improvement in stopping these 35's. I went from new cheapo pads w/ resurfaced rotors to slotted rotors and new pads. There was a difference.

IMO...if you are running stockish tires, no need for slotted and/or drilled rotors. Those prices quoted are REDICULOUS!
 
  #3  
Old 03-30-2009
Downey's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2007
Location: Muncy, PA
Posts: 8,470
Likes: 0
Received 6 Likes on 6 Posts
just got to advace and run cheap pads there like 20 bucks for both sides
 
  #4  
Old 03-30-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
Stock rotors suck!
 
  #5  
Old 03-30-2009
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
get 'em turned and put on some good pads and it's very good braking.
 
  #6  
Old 03-30-2009
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
Wagner Thermoquiets..., no dust.. stops on a dime.. just remember to run new rotors or get the rotors cut before you install them, otherwise.. madness on squeaking...
 
  #7  
Old 03-30-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
You have to get new rotors machined before you run them?
 
  #8  
Old 03-30-2009
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
getting rotors turned(resurfaced) OR getting new rotors prior to new pads is a must.
 
  #9  
Old 03-30-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
Drilled rotors grab and stop alot better though right?
 
  #10  
Old 04-06-2009
nross's Avatar
Member
Join Date: Nov 2008
Location: Binghamton, NY
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts
Drilled rotors just cool better I believe.

To be honest, I had alot of problems with ford doing my brakes... they are really simple to do yourself and WAY cheaper. I had my front brake rotors turned and motorcraft pads put on and I left witha 375$ bill. They lasted all of about 20k miles before the rotors were so warped it was just annoying to use the brakes.

I went to NAPA and they have really nice rotors in my opinion. They were reasonable about 100 dollars for both and they were well surfaced, and good quailty I thought.

I would stay away from the motorcraft pads, to me they left my rims black constantly with brake dust which irritates me beyond belief. I put napa pads on.. but I wouldnt do they they squeek from time to time. Go to with the Wagner pads at advanced. I put them on a F350 turbo diesel for my father and they are beautiful pads. They outproform the motorcraft ones, have no brake dust, are ceramic, and have a lifetime warrantee! you wear them down you get free pads.

Tell ford to shove it with redicilous costs of motorcraft parts. grrrrr. I'm very upset with my ford dealer as you can tell... they have r**ed me time and time again :(.
 
  #11  
Old 04-06-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
Originally Posted by nross
Tell ford to shove it with redicilous costs of motorcraft parts. grrrrr. I'm very upset with my ford dealer as you can tell... they have r**ed me time and time again :(.


Haha alretty done
 
  #12  
Old 04-06-2009
98rangerxlt's Avatar
Member
Join Date: Mar 2009
Location: Bakersfield, CA
Posts: 725
Likes: 0
Received 0 Likes on 0 Posts
Where else can you get wagner pads besides advance because we dont have an advance here.
 
  #13  
Old 04-07-2009
Blackonblackfx4's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Edmonton, Alberta
Posts: 914
Likes: 0
Received 1 Like on 1 Post
Originally Posted by 98rangerxlt
Where else can you get wagner pads besides advance because we dont have an advance here.

I also want to know! no advance where I live
 
  #14  
Old 04-07-2009
nross's Avatar
Member
Join Date: Nov 2008
Location: Binghamton, NY
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts
I'm sure you can order them online. I have to say they were nice looking pads, no dust, good stopping, man I must say one product I am happy with.

You could try ebay, they are on there. Ask your autostore for them... im sure they can order them for you. Hell I like them so much if you sent me a money order I would buy them for you and ship them to you, they are that good.

Or maybe try EBC pads I hear they are great too... you can order those online allover the place they are like 80 a set I think for the greenstuff pads. They are liek racing pads basically... but my idea is if you use a performance part on regular applications they usually last really long... or sometimes they just suck.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mldehan
Drivetrain Tech
4
06-11-2013 11:50 PM
effexfour
Drivetrain Tech
3
09-02-2009 10:11 AM
My05edge
Suspension Tech
9
10-14-2008 06:42 AM
TommyC
General Ford Ranger Discussion
30
11-11-2007 08:20 AM
l2en
General Ford Ranger Discussion
13
07-19-2006 02:30 PM



Quick Reply: Brake suggestions



All times are GMT -6. The time now is 11:10 AM.