4x4 problems
#1
4x4 problems
tryin to fix my four wheel drive so somethin on the truck will work right. i replaced the vaccuum lines thinking maybe that was it. no go. did the auto to manual mod that read about here, still a no go. they wont lock in at all. the cv's and driveshaft will lock but the hubs will not. any ideas? im about to scrap the god damn truck. its a 1998 with a 3.0 btw.
#3
yea it has to be lockin in cause the driveshaft is only locked in when the 4wd light is on. trust me i no that locks cause it spins as the truck moves(thus its locked). same as the cvs. and this is the mod. http://www.ford-trucks.com/article/i...cuum_Hubs.html [/URL]
#4
#8
#9
#10
warn doesn make hubs for rangers newer than 93...he might have thought you have the newer live axle set up in which you need everything off of an old ranger to convert to manual hubs...the only manual hubs you can get are the AVM/Rugged ridge hubs
Thread
Thread Starter
Forum
Replies
Last Post
JGod
General Ford Ranger Discussion
3
02-08-2014 06:35 AM
MDM
Drivetrain Tech
8
09-16-2008 10:19 AM