Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

have a feeling i might be replacing the Trans

Thread Tools
 
Search this Thread
 
  #1  
Old 04-01-2010
SteveOh's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: Ft. Campbell Kentucky
Posts: 4,585
Likes: 0
Received 0 Likes on 0 Posts
have a feeling i might be replacing the Trans

well for a while now when taking off i get this thud/bump like the trans is slipping and also when slowing down almost to a stop it does the same thing..i know it is not the u-joints because those were replaced about 15k miles ago..do you think my trans is slipping or t-case? i hope it isnt the transmission...also when i put it in reverse and hit the gas it snatches into reverese like it slips and slams into gear but when driving it shifts smoth if im easy on it
 
  #2  
Old 04-01-2010
Toreador4x4's Avatar
Member
iTrader: (6)
Join Date: Apr 2007
Location: Livonia, MI
Posts: 3,958
Likes: 0
Received 3 Likes on 3 Posts
first remove the driveshaft, mark the two halves, infront and behind the slip shaft and take it apart, clean all the grease out and pack it back full, install it in the same spot and try again
 
  #3  
Old 04-01-2010
SteveOh's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: Ft. Campbell Kentucky
Posts: 4,585
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Toreador4x4
first remove the driveshaft, mark the two halves, infront and behind the slip shaft and take it apart, clean all the grease out and pack it back full, install it in the same spot and try again
i never thought about that..ive never put grease in there and there isnt much in there..i will give that a try..but you think thats maybe the issues im having? my driveshaft is the one with the small piece that is about 8 or 9 inches long then the rest of the shaft slips in into that.
 
  #4  
Old 04-01-2010
Toreador4x4's Avatar
Member
iTrader: (6)
Join Date: Apr 2007
Location: Livonia, MI
Posts: 3,958
Likes: 0
Received 3 Likes on 3 Posts
yes....try that
 
  #5  
Old 04-01-2010
SteveOh's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: Ft. Campbell Kentucky
Posts: 4,585
Likes: 0
Received 0 Likes on 0 Posts
will do i got to replace leaf springs tomorrow so i will definitely give that a try...what kind of grease goes in there?
 
  #6  
Old 04-01-2010
Toreador4x4's Avatar
Member
iTrader: (6)
Join Date: Apr 2007
Location: Livonia, MI
Posts: 3,958
Likes: 0
Received 3 Likes on 3 Posts
i just use wheel bearing grease
 
  #7  
Old 04-01-2010
Tys 4x4 FTW's Avatar
RF Veteran
iTrader: (8)
Join Date: Jul 2008
Location: Las Vegas, Nevada
Posts: 6,575
Likes: 0
Received 2 Likes on 2 Posts
my truck does the same thing when going into reverse.
 
  #8  
Old 04-03-2010
SteveOh's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: Ft. Campbell Kentucky
Posts: 4,585
Likes: 0
Received 0 Likes on 0 Posts
packed it full of grease and bam all those issues are gone thanks man i was thinking the tranny was slipping..
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fletch12518
4.0L OHV & SOHC V6 Tech
2
08-15-2008 04:06 PM
rideac1
4.0L OHV & SOHC V6 Tech
17
11-27-2007 02:58 PM
Lefty04LevelII
General Ford Ranger Discussion
10
07-27-2006 12:34 AM
elmo_4_vt
General Ford Ranger Discussion
8
01-13-2006 09:59 AM
PhilpotHunter
2.9L & 3.0L V6 Tech
5
10-07-2005 10:32 AM



Quick Reply: have a feeling i might be replacing the Trans



All times are GMT -6. The time now is 02:24 AM.