disk bake upgrade
 

let me start out by saying i don't know if this will work but i had a ID about this and i want to get some feed back before i do it

i got a 88 ranger with a 7.5 rear end but i know i can upgrade it with a newer ranger that got a 8.8 and it will be a bolt in upgrade but my ? is can i take the disk brake off a explorer and bolt it up to the 8.8 for the ranger plz help me out with this ID

You can do whatever you'd like with a welder and some fab skillz.

but you think you are do it with out a welder

your 7.5 and the 28 spline 8.8 I think should both have the same axle tube size or whatever, so the 8.8 28 spline disc swap should basically be the same for your 7.5 although I'd look at getting an 8.8 if you're going to the trouble anyway.

read here, should be the same for you axle.
https://www.ranger-forums.com/engine-drivetrain-122/how-rear-disc-brake-conversion-stock-28-spline-ranger-rear-end-95557/

yea i'm going to pull the ranger 8.8 tues from the junk yard

CLICK: How-To: Rear Disc Brake Conversion on Stock 28-Spline Ranger Rear-End

I when to the jk and all i could find is a 7.5 does someone know what year and model i look for for the 8.8

Umm...every year every model?

All the ranger i seen had the 7.5 not the8.8

what has the 8.8 and will bolt up to my ranger with no welding

another ranger. 4.0. look for newer xcabs, 4x4. they should all have the 8.8

Is that the only one that will interchange