Do your best: OBD Codes What do you think? 3.2 2016
 

Hi,
Could you take a look at these and let me know what you think it might be?
I suspect this is a common enough issue on the 3.2 Ford Ranger, she is a 2016 with 150K Miles on her.

There is a small judder in her when accelerating up a long hill - which may be related.

Car Scanner ELM OBD2
Version: 1.121.0/401210/GP
DTC report
Connection profile: Ford 3.0L & 3.2L DieselDate: 18/08/2025 21:13:15
VIN:
============================
OBD-IIOBD-II
DTCs: 108
----------------------------
P0532(00) [0x053200]
AC refrigerant pressure sensor - low input
A/C Refrigerant Pressure Sensor Circuit Low Input
Status: Test failed, Test failed (current drive cycle), Pending, Confirmed, Test failed since last DTC clear
----------------------------
P0490(73) [0x049073] Archive (inactive)
Exhaust gas recirculation (EGR) system - circuit high
Status: Test failed since last DTC clear
----------------------------
P042F(00) [0x042F00] Archive (inactive)
Exhaust gas recirculation (EGR) valve actuator A - actuator stuck closed
Status: Test failed since last DTC clear
----------------------------
P006A(00) [0x006A00]
MAP sensor/MAF or VAF sensor bank 1 - correlation
Status: Test not completed during this operation cycle
----------------------------
P1103(00) [0x110300]
MAF Sensor In Range But Higher Than Expected
MAF Sensor In Range But Higher Than Expected
Status: Test not completed during this operation cycle
----------------------------
P1102(00) [0x110200]
MAF Sensor In Range But Lower Than Expected
MAF Sensor In Range But Lower Than Expected
Status: Test not completed during this operation cycle
----------------------------
P0299(00) [0x029900]
Turbocharger (TC)/supercharger (SC) - low boost
Status: Test not completed during this operation cycle
----------------------------
P0234(00) [0x023400]
Turbocharger (TC), engine boost condition - limit exceeded
Engine Overboost Condition
Status: Test not completed during this operation cycle
----------------------------
P0069(22) [0x006922]
Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) sensor - correlation
Status: Test not completed during this operation cycle
----------------------------
P0069(21) [0x006921]
Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) sensor - correlation
Status: Test not completed during this operation cycle
----------------------------
P2002(00) [0x200200]
Particulate trap, bank 1 - efficiency below threshold
Status: Test not completed during this operation cycle