4wd not workin?
#2
here is exactly what it says "This is a 92 Ford Ranger 5spd 2.9L V6 4x4. It has a new clutch, exhaust, tires, and transfer case encoder motor (4x4 shift motor). Needs a few oil gaskets (valve cover and oil pan), a power steering leak fixed (hoses), new front hubs and could be other odds & ends. The transfer case works fine (it even goes into 4LOW), but the front hubs won't engage. Starts and runs and has a 2" receiver with insert."
#3
#4
the '92s have auto hubs without vacuum......when they get torque applied to them, then they engage......it is a common problem with the autos to go out.....
it is a cheap fix.......just get a set of Waren Manual hubs.....usually run about $130 and they are 100x stronger than the factory auto hubs
it is a cheap fix.......just get a set of Waren Manual hubs.....usually run about $130 and they are 100x stronger than the factory auto hubs
#10
Thread
Thread Starter
Forum
Replies
Last Post
discord1117
4.0L OHV & SOHC V6 Tech
3
10-01-2012 05:17 PM
92ranger19
General Technical & Electrical
0
05-21-2010 11:15 AM