Adding fluid
#1
12-04-2010
Join Date: Dec 2010
Location: MI
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Adding fluid
Hey all,
New here and have a question. I found a thread somewhere else that doesn't really give a definitive answer to the question. The questions was (to the effect)...
"Can I add trans fluid by removing the shifter and adding it through the top (remove shifter top plate)?"
I understand that if it can be done I would need to pull the plug as not to overfill.
Is this possible?
New here and have a question. I found a thread somewhere else that doesn't really give a definitive answer to the question. The questions was (to the effect)...
"Can I add trans fluid by removing the shifter and adding it through the top (remove shifter top plate)?"
I understand that if it can be done I would need to pull the plug as not to overfill.
Is this possible?
#2
12-04-2010
could it be done yes but is alot of work unlike just removing the fill plug and filling it with a suction gun
like so
Oil Suction Gun
like so
Oil Suction Gun
#3
12-04-2010
thats the way i do it every time. suction pumps never worked for me. I poured the first 2 quarts in, the had someone slowly pour the 3rd while i was under the truck waiting for it to come out the fill plug, when it did, i said to stop pouring, and put the plug in. Then put it all back together.
#4
12-04-2010
thats the way i do it every time. suction pumps never worked for me. I poured the first 2 quarts in, the had someone slowly pour the 3rd while i was under the truck waiting for it to come out the fill plug, when it did, i said to stop pouring, and put the plug in. Then put it all back together.
That's sig material right there...
GB :)
Thread
Thread Starter
Forum
Replies
Last Post
greensystemsgo
General Ford Ranger Discussion
3
07-16-2010 09:13 PM
