Help! Axle swap, no speedo
#1
Join Date: May 2008
Location: Tucson , Arizona
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Help! Axle swap, no speedo
Hi there,
I just had my stock 7.5 replaced with an geared 8.8, but now I have no speedo. I have to come to the conclusion that the new rear did not have a Tone|Abs|Exciter Ring installed. It came off of a different year Ranger. Now, my 99 uses the ABS Sensor in combination with the Tone|Abs|Exciter Ring to read the vehicle speed.
My question is, can the Ring be installed without having to re-setup the gears? Where can I find a new Ring? I'm going out of town on Monday, and hopefully can fix this by Sunday.
Any help would be great.
Thanks
I just had my stock 7.5 replaced with an geared 8.8, but now I have no speedo. I have to come to the conclusion that the new rear did not have a Tone|Abs|Exciter Ring installed. It came off of a different year Ranger. Now, my 99 uses the ABS Sensor in combination with the Tone|Abs|Exciter Ring to read the vehicle speed.
My question is, can the Ring be installed without having to re-setup the gears? Where can I find a new Ring? I'm going out of town on Monday, and hopefully can fix this by Sunday.
Any help would be great.
Thanks
#3
Join Date: May 2008
Location: Tucson , Arizona
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
#4
Join Date: May 2008
Location: Tucson , Arizona
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
If it helps, I am missing the ring left of the ring gear...
http://www.offroadidaho.com/pictures/build/gears.jpg
http://www.offroadidaho.com/pictures/build/gears.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Vexy
General Technical & Electrical
0
03-15-2013 02:39 PM
Daedalus
General Technical & Electrical
0
06-16-2010 04:57 PM
TommyC
General Ford Ranger Discussion
7
07-27-2006 05:12 PM