Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

4 low

Thread Tools
 
Search this Thread
 
  #1  
Old 09-06-2011
4.0lRanger02's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Hunlock Creek, PA
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
4 low

Ok so i was hooking up a set of fog lights with a friend of mine. He had hooked up the lights on his truck so i trusted that he knew what he was doing. I ran the wires through the places i should. We got to the good point to click on the lights and see........ As soon as i flipped the switch i blew a inline fuse. i thought ok must have wired the switch wrong. SO i started up my truck to drive down to A n A. Let the clutch out and i was in 4 low !! Does this have anything to do with the lights or just a coincidental.
 
  #2  
Old 09-06-2011
99offroadrngr's Avatar
TOYOTA
iTrader: (37)
Join Date: Jul 2007
Location: Massachusetts
Posts: 11,713
Received 9 Likes on 8 Posts
um.... auxiliary lights have nothing to do with drivetrain
 
  #3  
Old 09-06-2011
4.0lRanger02's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Hunlock Creek, PA
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Um... its stuck in 4 low . The lights blew a fuse and may have shorted out the system switch that switches from 2wd high to 4wd and 4wd low some how.
 
  #4  
Old 09-06-2011
4.0lRanger02's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Hunlock Creek, PA
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
I removed the Transfer case motor, and put it into 2 high manually which is a temporary fix for now. But i still cant figure out how the lights fried the system. Or how it started up in 4 low on its own
 
  #5  
Old 09-06-2011
morris's Avatar
RF Veteran
iTrader: (5)
Join Date: Feb 2008
Location: South Detroit.
Posts: 7,841
Likes: 0
Received 2 Likes on 2 Posts
Did you disconnect the battery first?
 
  #6  
Old 09-06-2011
4.0lRanger02's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Hunlock Creek, PA
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Yep i disconnected the negative and let it reset for about 20 min or so. and it didnt clear any codes or anything.
 
  #7  
Old 09-06-2011
99offroadrngr's Avatar
TOYOTA
iTrader: (37)
Join Date: Jul 2007
Location: Massachusetts
Posts: 11,713
Received 9 Likes on 8 Posts
thats why i don't let anyone do anything on my vehicles. i still don't see how it would go into 4 low if a fuse blew. When i wired my hellas, none of the wires for the lights were tapped into any wire on the truck. who knows wtf your friend did.
 

Last edited by 99offroadrngr; 09-06-2011 at 10:34 PM.
  #8  
Old 09-06-2011
morris's Avatar
RF Veteran
iTrader: (5)
Join Date: Feb 2008
Location: South Detroit.
Posts: 7,841
Likes: 0
Received 2 Likes on 2 Posts
I meant before your buddy tackled the project?
 
  #9  
Old 09-11-2011
4.0lRanger02's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Hunlock Creek, PA
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Sorry it took so long to respond. I was dealin with water for the past 5 days. And the battery was disconnected until the end of the install when we checked the lights just b4 installing the switch and everything was working good. I finally broke down and took it to my mechanic and he said that there is a plug behind the firewall that controls the transfer case motor and the speedometer, he said its probably a loose wire or fried plug. Guess i learned my lesson in trusting ppl on my truck lol
 
  #10  
Old 09-17-2011
4.0lRanger02's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Hunlock Creek, PA
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Welp got some bad news on the Ranger. My mechanic friend couldnt find any loose wires. And when he reconnected the transfer case motor it goes back into 4 low.. ... He said that most likely some "black box" thingy that i forget what he called it lol but its located in the passengers side dash area.

Make scene to anyone? lol b/c he confused the heck outta me
 
  #11  
Old 10-04-2011
4.0lRanger02's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Hunlock Creek, PA
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Well guess what the part finally came in and i now have the ability to switch from 4wd to 2wd its great. i had to test it out today :) part price came to about 210$ for the four wheel drive module that shorted out.
 
Attached Thumbnails 4 low-297290_247395921973907_100001105042581_672926_1427066891_n.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sammyj
General Ford Ranger Discussion
1
05-07-2015 10:17 PM
Squisher
General Technical & Electrical
3
11-11-2012 05:50 PM
JRacer
4.0L OHV & SOHC V6 Tech
23
05-06-2009 11:25 PM
xp1ik99
Wheels & Tires Semi-Tech
12
08-15-2006 07:52 PM
tchs_drummer06
2.3L & 2.5L I4 Tech
37
03-22-2006 12:30 PM



Quick Reply: 4 low



All times are GMT -6. The time now is 02:18 AM.