Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

4x4 not working. 2008 XLT AT.

Thread Tools
 
Search this Thread
 
  #1  
Old 02-27-2020
Ramdeo's Avatar
Member
Thread Starter
Join Date: Feb 2020
Location: Port of Spain
Posts: 2
Received 0 Likes on 0 Posts
4x4 not working. 2008 XLT AT.

Good day,
Firstly I'm from Trinidad and Tobago, nice little island in the Caribbean.
Ranger is 2008 XLT right-hand drive, 4x4 automatic.
Problem is the 4x4 won't engage, not hearing any noise when I turned the ****, the 4x4 and 4L light on the dash is remaining on, the speedometer is not working properly and when I got the vehicle scanned it was saying that the 4L was on but it is not driving like if it is on. I recently purchased this van and the van drives good other than the problem listed.



 
  #2  
Old 02-27-2020
RonD's Avatar
RF Veteran
iTrader: (1)
Join Date: Jan 2014
Location: Vancouver, BC
Posts: 30,654
Received 2,820 Likes on 2,586 Posts
Welcome to the North American Ranger forum

What you have is an Argentina made Ford Ranger, these were not allowed to be imported into US or Canada

So not sure how close they will be to the ones we know

If I had this issue I would first find the 4x4CM, it controls the 4x4 system, in our 2008 model this would be behind the radio

It looks like this: https://i.ebayimg.com/images/g/NboAA...Rnc/s-l300.jpg

This module controls the 4x4 lights and shift motor on the transfer case
And these were known to fail, our 2001-2011 models used them
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fligex
Drivetrain Tech
7
10-31-2021 11:00 AM
kidd
General Ford Ranger Discussion
4
04-05-2015 04:14 PM
2003Ranger
General Technical & Electrical
13
08-24-2011 02:40 AM
trextegra
Drivetrain Tech
0
06-20-2011 06:50 PM
94'RangerGuy
General Technical & Electrical
0
01-13-2011 12:06 PM



Quick Reply: 4x4 not working. 2008 XLT AT.



All times are GMT -6. The time now is 10:41 AM.