Trans Fitment Help
#1
#6
A tranny from a 4 banger or a 3.0 won't work unless you can change the bellhousing. The bolt patterns are different. Any tranny from a 2.8 or a 2.9 will bolt up to the 4.0. The tranny to engine bolt pattern are the same for the 2.8,2.9 and 4.0.
TK-4,5
FM-145
FM-146
M5OD
The M5OD is the best of the Ranger manual trannys. The belhouseings can be changed on all except the M5OD.
All of them are different lengths, so the best bet would be to get one like the original or you would have to shorten/lengthen the driveshaft and move the tranny crossmember.
TK-4,5
FM-145
FM-146
M5OD
The M5OD is the best of the Ranger manual trannys. The belhouseings can be changed on all except the M5OD.
All of them are different lengths, so the best bet would be to get one like the original or you would have to shorten/lengthen the driveshaft and move the tranny crossmember.
Thread
Thread Starter
Forum
Replies
Last Post
firebirdude
General Ford Ranger Discussion
18
06-15-2017 07:08 AM
Muleskinner
Drivetrain Tech
2
05-03-2015 04:16 PM
BlackRanger04
Drivetrain Tech
26
12-05-2010 10:17 PM
lifted97ranger
General Technical & Electrical
3
01-23-2008 11:48 AM